ubuntu_hardy_8_04

Ubuntu Hardy 8.04 LTS

Hardy is released! Official download page will be quite busy, but you can get Hardy torrents from my page.


Ubuntu Hardy 8.04 will be published was published on April 2008 (200804-30). It will be Long Term Support version. It will probably be supported three years on the desktop (until 2011) and five years on the server (until 2013).

This article has lot of notes based on beta testing. There are many bugs, as there are supposed to be in a beta. This does not mean that production version would have these problems.

© 2008 Tero Karvinen www.iki.fi/karvinen GPLv2

Testing Hardy Heron and writing this document is supported by Haaga-Helia University of Applied Sciences

Download Beta – also has list of new features.

Blueprints – new features

All Hardy Bugs


Hardy Beta on dc7700 – Testing Notes

Works fine with lab computers (dc7700), all hardware seems to be automatically configured with built-in drivers. Main problems are currently (beta, 2008-04-16: Apache SSL cert, installer time zone selection; minor problems: asking submissions to closed hwdb, beeps all the time, miro broken, firefox add ons broken.

Hardware: HP-Compaq dc7700, 64bit, about 4 GB RAM, 19” flat panel display. This machine works well with Gutsy. In Gutsy all hardware is autodetected and configured automatically.

Software: Hardy Beta amd64 Desktop, downloaded from Ubuntu.com on 2008-04-14 w16 Mon.

I wrote the report while doing the things reported with a computer. Links to bug reports in Launchpad were added afterwards.


Boot to Live CD

Boot menu popped up language selection. Autocontinue timer still probably selects live CD in 30 s. Chose English, “Try Ubuntu without making any changes on your computer”.

Desktop looks very familiar and similary to Gutsy. Backround is now artists’ view of a heron.

Display was detected and configured automatically. Screen was in correct place, icons, lines and fonts looked sharp. Verified by using monitors’ built in settings menu: Menu: Advanced Menu: Information: “Current settings: 1280×1024-60Hz; Recommended settings: 1280×1024-60Hz”.

Mouse was autoconfigured. All features worked: move, left, right, middle, scroll.

Starting Firefox by clicking on panel showed that desktop effects are enabled by default. They look cool, but I can already see trouble ahead – hope they are finally stable.

Network was automatically configured, tested by googling “Tero Karvinen” and surfing my pages. Finnish keyboard was not automatically detected. However, non-scandic letters seemed to work fine. I could have selected keyboard on CD boot menu, and I can choose it on install.

Firefox is now better integrated to Ubuntu theme. It is Firefox 3.0b4 (Help: About Mozilla Firefox), even though typing url “about:” incorrectly shows version “1.9b4”. (Bug?). Home icon is now in a weird place. New url guessing system allows you to type the middle of the url instead of the beginning.

Test machine lacks first hard drive, so on the boot BIOS required me to press F1. This is a hardware issue and should not be present outside Haaga-Helia labs.

Boot blinked “press esc for GRUB menu” (or something like that), then proceeded to boot. Booting seemed very fast! I wonder if it just did the Windows thing and showed the login screen while continuing boot on the background. Anyway, this is an improvement.

I was logged into desktop. Display seemed good (clear, high res, sharp, right image size). I tried browsing to www.iki.fi/karvinen. Thus, I saw that mouse, network and keyboard worked. I tested typing scandics (äö) to URL bar and noticed that scandics worked too. Thus, desktop was correctly installed.

On the first boot, there were two notifications. Topmost was “Information available” and it obscured the notification belowed. I did not have time to write the down before they disappeared, because I was busy writing other notes.


Install

– Language (during install): English

Time zone selection is unusable. Map just jumps around, it’s very hard to hit Helsinki. In addition to the map insanely jumping around, it forces user to pixel perfectly pin point Helsinki in the moving map. (Time Zone selection map jumps BUG)

– Time zone: Helsinki (EEST GMT+3:00)

– Keyboard: Finland – Finland

Partitioning (”Prepare disk space”)

Partitioning Wizard now shows which operating system is taking space. Streching is done by dragging the line between partitions.

Guided – use entire disk (sda)

Bug/Enhancement: Installer makes me wait between questions. This computer has 4 GB of RAM, and most computers have enough. Couldn’t it simply read the questions to memory before the installer starts?

– Who are you? “Tero Karvinen”, tkarvine, piilo5_ana!, tuuna. (And no, that’s not really my password)

Ready to install. Checked that I answerred questions correctly as this is the last moment to cancel. Noticed that Advanced tab now has an option to set network proxy.

Install

Non-interacitve part of installation started.

During the installation, I noticed that migration assistant did not pop up when I chose to erase entire disk. I’m happy to see that at least that problem with migration assistant is now fixed. Time zone selection has a serious bug in it.

When Ubuntu was installing, suddenly “target” directory popped open in nautilus. Maybe it was automounted after being created. This can easily confuse users. (BUG: /target opens in nautilus during install)

Installation finished 10 minutes after starting. In the end of installation, /target window was raised on top. “Installation complete” dialog was obscured by “target” window.

Continue using live cd or restart? “Restart now“. CD was ejected, but screen was filled with green, repeated garbage with thin lines trough it. This garbage obscured the “press enter to continue”. This will probably make beginners hard boot the computer with power button. I pressed enter and reboot continued. I did not have to use power button. CD tray was not automatically closed. (BUG: Junk on Screen After CD Eject – Encourages Hard Boot ) This has worked (with the same dc7700) on some older Ubuntus, probably Gutsy.


Features to be tested in Install

User login name: installer should check that login name is sane. Best to limit to POSIX user name /[a-z]{1}[a-z0-9]{0,7}/. But I could not imagine a situation where it would be smart to have user name (login name) of “Einari Vähäkäähkä-Rüetschi”. (Unverified BUG: Login name not checked for sanity in installer) This used to be a problem, check if it is in Hardy Beta.


Hardy Desktop features

Desktop seems faster and more responsive now than in Gutsy. Could it be related to desktop effects, or is there some new woodoo in the kernel?

2008-04-14: “System tools: Hardware testing” is again asking us to send information to Ubuntu Hardware database. This database is closed, it’s unclear who owns the data (maybe Canonical would like to have it), and Canonical representatives ignore questions about hwdb status. I filed a bug in 2006 (yes, two years ago), contacted Canonical personnel by email and face-to-face. No decent answers to my questions were given. Still marked “in progress”. (BUG: Closed hardware database)

Updated everything with update manager: update, partial upgrade, start upgrade. Weirdly, update manager told me to close all open applications. Hopefully, this does not happen every time I update. Update manager said that with an example connection, downloading takes about 50 min. This was quite misleading, as it only took about 2 min with Haaga-Helia’s connection. Installation of packges took less than 15 min (according to update managers ETA). Maybe this was a dist-upgrade, and the warnings were shown because of that.


Firefox

Home button appeared in the old location. Maybe it’s done differently during live-cd and installed system.

Wheel works in reverse. When I scroll towards me, text becomes smaller. I hope brain damage is not permanent.

Bug: Keyword search broken, tested with launchpad ubuntu bugs search.


Firefox Add-Ons

Firefox add-ons: Get add-ons (former Get Ubuntu Addons) recommends “Clipmarks”. “Learn more” link does not seem to work. Does this addon submit user data to a closed, commercial service? At least the description does not warn that it would. (BUG Learn more -link does not work in Get (Ubuntu) Addons to Firefox) (Unverified BUG? No warning about addons submiting user data to internet / unverified)

Clicking “Install” to addon shows “Installing…” text in place of button, and a window so small that it only shows window borders. An update was running at the same time. After window is resized larger, I can see that it’s title is “Firefox” and the window itself is empty. No wa (BUG: Addon install does not finnish, displays unusably small window)

Firefox add-on system seem broken.

Get Ubuntu Addons has these usefull addons:

  • WebDeveloper
  • AdBlock (but not AdBlock plus)

(BUG: Install/Remove Extensions has “Cancel” button instead of close ) but it of course does not cancel installing the programs after I have chosen “install more progs”.

(BUG: Recommends Proprietary Software)


Internationalization and Localization

Installing language (System: Administration: Language support) requires reboot. Is this really necessary? Couldn’t the core components of language support be installed by default, and only install the plain text po files later. (Unverified BUG: Adding language requires reboot)

BUG: language and region in language support

https://bugs.launchpad.net/ubuntu/+bug/116438/


Location Ignored

Location is asked in installer. (Yes, the jumpy one in Hardy Beta). But this is mostly ignored. In Hardy, at least weather applet ignores this. Panel: Add to Panel: Weather Report. I have probably reported this earlier. (BUG: Location Ignored. Location ignored in Weather Applet)


Elephant Skin Background Included

Desktop / Right Click: Change Desktop Background. Elephant skin is finally included.


Package Manager

Package Manager (APT) is also commented above, eg. in Firefox add ons and update manager.

Popular packages (according to Applications: Add/Remove: Popularity) that are not installed by default: – Thunderbird – (KNetAttach) – (Amarok) – (OpenOffice.org Database) – Finally Ubuntu got rid of that! Use eg. MySql instead. – (KDE Bluetooth stack) – Katapult – KPDF …

Many of those are not that interesting. Either they are for KDE and eqvivalent Gnome counterparts were chosen, or they are not very good (OpenOffice Database). There should now be a Gnome Katapult-like app too.

Some usefull applications that are missing:

  • Inkscape
  • gFTP (because Gnome GUI scp does not work BUG)
  • Qalculate
  • Open ClipArt
  • Miro

Some people also want to enable “All available applications” and install “Ubuntu restricted extras”. This adds support for Java (someday to be Free…), Flash and mp3.


Miro

Applications: Add/Remove; Show: All Open Source Applications; Search: miro; (install)

miro 1.1.2-0ubuntu2

BUG: Miro is not shown in Applications menu. Used to work in Gutsy.

BUG: Channel tree unresponsive Used to work in Gutsy.

Someone proposed updating miro to upstream version despite the freeze.


Don’t Beep at Me!

BUG: Beeps all the time. Still a problem. For example, beeps PC speaker once every time user presses tab in CLI. And that’s often.

Could also be fixed in Bash or readline (based on comment on the bug):

# /etc/inputrc
# do not bell on tab-completion
set bell-style none

BUG: PC speaker is not muted with Volume control or should I say “No Obvious Way to Mute PC Speaker”


Desktop Effects

Default settings for desktop effects seem to work fine.

Enabling Extra desktop effects causes problems. System: Preferences: Appearance: Visual Effects: Normal → Extra. After a while of use, Firefox window started to flap by itself. Moving the window around fixed this, but it’s annoying anyway. (Not yet reproducible BUG: Window corner keeps flapping with Extra visual effects)


Automatic Bug Reports with Apport

When a program crashes, user has an option to submit bug report. After verifying user willingness to send data a couple of times, letting user to check the technical report and making him wait about one min, apport opens launchpad login page in Firefox. If logging in to launchpad and an account are required, Apport should tell about this beforehand. (BUG)


OpenOffice Finnish Spell Checking

(BUG: Finnish Spell Checking is not Installed with Finnish language support). When Finnish language support is installed, OpenOffice should automatically spell check all text marked as Tools:Language:For all text: Finnish.

To install

$ sudo apt-get install openoffice.org-voikko
$ oowriter
Tools:Options:Languages settings:Writing Aids:Available language modules
Finnish spellchecker (Voikko): enabled
Tools:Language:For all text:Finnish

Now it should spell check correctly. You might also need to set default language for documents.


Printing

  • System: Administration: Printing
  • New printer

Because lab network printer (HP Laserjet 2200, ethernet, dhcp) was autodetected, I just kept pressing Forward with default settings until printer was installed.

Printer testing

Chose “printer” in Admin:printers, Print test page. It did not print into this room.

So I also added another autodetected network printer, HP LJ 4400 as printer2. I printed test page with that too. Pages did not seem to print in the room I was, have to try later with a printer I have tested before.

(BUG: Default print size is letter) Yes, in “Printer options” tab. This is an old problem. US Letter is an obsolete page size only used in four countries in the world.


Gnome-Do

Gnome-do application launcher is available for installing. It’s similar to Katapult and Quicksilver. Seemed to work ok. Setting the keybinding is not intuitive. Program looks quite cool…

Looking at Gnome-Do homepage, it seems that GnomeDo and its plugins are coded in C# or Mono. Let’s see how long the love between Microsoft and “free” mono developers lasts.


Desktop Freeze

Desktop froze after clicking panel clock. Fixed with alt-ctrl-backspace. Alt-F2 gnome-panel. Then I got my panel back.


Panel Clock

New weather + world clock is nice.

(BUG: wrong week numbers ) Still. (BUG: uses obsolete units )


Nautilus


Apache on Hardy


Web server

$ sudo apt-get update
$ sudo apt-get install apache2
$ firefox http://localhost

Localhost shows the default “It works” page.

$ ip addr|grep eth
$ firefox http://172.28.1.173/

Page opens.

$ host 172.28.1.173 # not found, broken name server in our lab

Thus, web server is successfully installed.


User homepages

$ sudo a2enmod userdir
Module userdir installed; run /etc/init.d/apache2 force-reload to enable.
$ firefox http://localhost/~tkarvine/

Does not work yet, 404 not found.

$ sudo /etc/init.d/apache2 force-reload
$ mkdir public_html
$ echo "tero">sample.html
$ firefox http://localhost/~tkarvine/

Shows dir listing, clicking sample.html shows contents. Thus, user homepages work.


Encrypted TLS / https Connections Difficult

Just to speed up testing:

$ sudo apt-get install curl
$ curl http://localhost
<html><body><h1>It works!</h1></body></html>

Encrypted TLS connection does not work yet:

$ curl https://localhost
curl: (7) couldn't connect to host

Let’s see if we already have it:

$ ls /etc/apache2/mods-available/|grep ssl
ssl.conf
ssl.load

Enable:

$ sudo a2enmod ssl
$ sudo /etc/init.d/apache2 force-reload

(BUG: tab does not complete modules with a2enmod)

$ curl https://localhost
curl: (35) error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol

Seems to work, let’s try with a browser

$ firefox https://localhost

Nope, it’s broken.

Secure Connection Failed
An error occurred during a connection to localhost.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
The page you are trying to view can not be shown because the
authenticity of the received data could not be verified.
Please contact the web site owners to inform them of this problem.

(No obvious way to enable SSL/TLS in Apache2. BUG: apache2-ssl-certificate has gone missing since feisty and Out of the box SSL config should be made available for Apache with default-ssl config file attached) I hope this does not mean creating a certificate by hand, one command at a time. This was already broken in Gutsy.


OpenSSH on Hardy

$ sudo apt-get install openssh-server
$ ssh localhost
continue connecting (yes/no)? yes
tkarvine@localhost's password:
tkarvine@tuuna:~$ logout
Connection to localhost closed.

Ok, that was easy.


Ubuntu Automatically Contacts Servers over the Internet

Ubuntu automatically contacts some servers over the internet. Nothing is done to hide this behavior, but informed consent is not asked for either.

Firefox “Latest Headlines” is an RSS or Atom feed from http://en-us.fxfeeds.mozilla.com/en-US/firefox/headlines.xml . At least this will allow Ubuntus to be counted and IP addresses collected. In addition, normal browser agent string might be sent, which could include Ubuntu version, Firefox version and CPU architecture.

Firefox start page is set to http://start.ubuntu.com/8.04/ . Ubuntu’s verbose user-agent string sends a lot of data about local computer. “Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9b5) Gecko/2008041515 Firefox/3.0b5”

Does Ubuntu synchronize its time from ntp.ubuntu.com by default?


Gnome Terminal


Things to be tested


Machinotero – Hardware and Software Details

$ wget http://myy.helia.fi/~karte/linux/doc/machinotero
$ chmod a+x machinotero
$ sudo ./machinotero
tuuna 2008-04-14_2133
Machinotero http://www.iki.fi/karvinen/machinotero
Jump to next section by searching for "== ".
== Overview ==
=== uname -a ===
Linux tuuna 2.6.24-16-generic #1 SMP Thu Apr 10 12:47:45 UTC 2008 x86_64 GNU/Linux
=== cat /etc/lsb-release ===
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION="Ubuntu hardy (development branch)"
=== cat /var/lib/acpi-support/*-* ===
786E1 v01.10
Hewlett-Packard
HP Compaq dc7700 Convertible Minitower
=== free -m ===
             total       used       free     shared    buffers     cached
Mem:          3828       2235       1593          0         69       1361
-/+ buffers/cache:        805       3023
Swap:         9703          0       9703
=== df -h ===
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda1             220G  3.5G  206G   2% /
varrun                1.9G  112K  1.9G   1% /var/run
varlock               1.9G     0  1.9G   0% /var/lock
udev                  1.9G   44K  1.9G   1% /dev
devshm                1.9G  176K  1.9G   1% /dev/shm
lrm                   1.9G   43M  1.9G   3% /lib/modules/2.6.24-16-generic/volatile
=== lshw ===
tuuna
    description: Mini Tower Computer
    product: HP Compaq dc7700 Convertible Minitower
    vendor: Hewlett-Packard
    serial: CZC7242W1Q
    width: 32 bits
    capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
    configuration: boot=normal chassis=mini-tower cpus=0 uuid=F494CF16-151B-DC11-BBDA-FE5F3D87000F
  *-core
       description: Motherboard
       product: 0A58h
       vendor: Hewlett-Packard
       physical id: 0
       serial: CZC7242W1Q
     *-firmware
          description: BIOS
          vendor: Hewlett-Packard
          physical id: 1
          version: 786E1 v01.10 (04/13/2007)
          size: 128KiB
          capacity: 960KiB
          capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer acpi usb ls120boot zipboot biosbootspecification netboot
     *-cpu:0
          description: CPU
          product: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz
          vendor: Intel Corp.
          physical id: 5
          bus info: cpu@0
          version: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz
          slot: XU1 PROCESSOR
          size: 1596MHz
          capacity: 1596MHz
          width: 64 bits
          clock: 1066MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm cpufreq
        *-cache:0
             description: L1 cache
             physical id: 7
             slot: L1 Cache
             size: 64KiB
             capacity: 64KiB
             capabilities: burst internal write-through data
        *-cache:1
             description: L2 cache
             physical id: 8
             slot: L2 Cache
             size: 2MiB
             capacity: 2MiB
             capabilities: burst internal write-back unified
        *-cache:2 DISABLED
             description: L3 cache
             physical id: 9
             slot: none
     *-cpu:1
          description: CPU
          vendor: Intel
          physical id: 6
          bus info: cpu@1
          slot: XU2 PROCESSOR
          size: 1867MHz
          capacity: 1867MHz
          capabilities: cpufreq
     *-memory:0
          description: System Memory
          physical id: 37
          slot: System board or motherboard
        *-bank:0
             description: DIMM Synchronous 667 MHz (1.5 ns)
             product: 64T128020HU3SB
             vendor: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
             physical id: 0
             serial: 14293808
             slot: XMM1
             size: 1GiB
             width: 64 bits
             clock: 667MHz (1.5ns)
        *-bank:1
             description: DIMM Synchronous 667 MHz (1.5 ns)
             product: 64T128020HU3SB
             vendor: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
             physical id: 1
             serial: 11253808
             slot: XMM2
             size: 1GiB
             width: 64 bits
             clock: 667MHz (1.5ns)
        *-bank:2
             description: DIMM Synchronous 667 MHz (1.5 ns)
             product: 64T128020HU3SB
             vendor: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
             physical id: 2
             serial: 17263808
             slot: XMM3
             size: 1GiB
             width: 64 bits
             clock: 667MHz (1.5ns)
        *-bank:3
             description: DIMM Synchronous 667 MHz (1.5 ns)
             product: 64T128020HU3SB
             vendor: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
             physical id: 3
             serial: 15B13808
             slot: XMM4
             size: 1GiB
             width: 64 bits
             clock: 667MHz (1.5ns)
     *-memory:1 UNCLAIMED
          description: Flash Memory
          physical id: 38
          slot: System board or motherboard
          capacity: 1MiB
        *-bank UNCLAIMED
             description: Chip FLASH Non-volatile
             physical id: 0
             slot: SYSTEM ROM
             size: 1MiB
             width: 2 bits
     *-memory:2 UNCLAIMED
          physical id: 0
     *-memory:3 UNCLAIMED
          physical id: 2
     *-pci
          description: Host bridge
          product: 82Q963/Q965 Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel module=intel_agp
        *-display UNCLAIMED
             description: VGA compatible controller
             product: 82Q963/Q965 Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 02
             width: 64 bits
             clock: 33MHz
             capabilities: msi pm vga_controller bus_master cap_list
             configuration: latency=0
        *-communication
             description: Communication controller
             product: 82Q963/Q965 HECI Controller
             vendor: Intel Corporation
             physical id: 3
             bus info: pci@0000:00:03.0
             version: 02
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=heci latency=0 module=heci
        *-network
             description: Ethernet interface
             product: 82566DM Gigabit Network Connection
             vendor: Intel Corporation
             physical id: 19
             bus info: pci@0000:00:19.0
             logical name: eth0
             version: 02
             serial: 00:0f:fe:5f:3d:87
             size: 1GB/s
             capacity: 1GB/s
             width: 32 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
             configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.20-k2-NAPI duplex=full firmware=1.1-0 ip=172.28.1.173 latency=0 link=yes module=e1000 multicast=yes port=twisted pair speed=1GB/s
        *-usb:0
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #4
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:1
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #5
             vendor: Intel Corporation
             physical id: 1a.1
             bus info: pci@0000:00:1a.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:2
             description: USB Controller
             product: 82801H (ICH8 Family) USB2 EHCI Controller #2
             vendor: Intel Corporation
             physical id: 1a.7
             bus info: pci@0000:00:1a.7
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-multimedia
             description: Audio device
             product: 82801H (ICH8 Family) HD Audio Controller
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 02
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi pciexpress bus_master cap_list
             configuration: driver=HDA Intel latency=0 module=snd_hda_intel
        *-pci:0
             description: PCI bridge
             product: 82801H (ICH8 Family) PCI Express Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-usb:3
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #1
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:4
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #2
             vendor: Intel Corporation
             physical id: 1d.1
             bus info: pci@0000:00:1d.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:5
             description: USB Controller
             product: 82801H (ICH8 Family) USB2 EHCI Controller #1
             vendor: Intel Corporation
             physical id: 1d.7
             bus info: pci@0000:00:1d.7
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-pci:1
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: f2
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
        *-isa
             description: ISA bridge
             product: 82801HO (ICH8DO) LPC Interface Controller
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: latency=0
        *-ide
             description: IDE interface
             product: 82801H (ICH8 Family) 4 port SATA IDE Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             logical name: scsi0
             logical name: scsi1
             version: 02
             width: 32 bits
             clock: 66MHz
             capabilities: ide pm bus_master cap_list emulated
             configuration: driver=ata_piix latency=0 module=ata_piix
           *-cdrom
                description: DVD-RAM writer
                product: DVD A  DH16A1L
                vendor: ATAPI
                physical id: 0.1.0
                bus info: scsi@0:0.1.0
                logical name: /dev/cdrom
                logical name: /dev/dvd
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: KH37
                capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
                configuration: ansiversion=5 status=open
           *-disk
                description: ATA Disk
                product: WDC WD2500JS-60M
                vendor: Western Digital
                physical id: 0.0.0
                bus info: scsi@1:0.0.0
                logical name: /dev/sda
                version: 10.0
                serial: WD-WCANKF669357
                size: 232GiB (250GB)
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5 signature=15a8dfb5
              *-volume:0
                   description: EXT3 volume
                   vendor: Linux
                   physical id: 1
                   bus info: scsi@1:0.0.0,1
                   logical name: /dev/sda1
                   logical name: /
                   logical name: /dev/.static/dev
                   version: 1.0
                   serial: 06c33f0b-62fe-41d1-b645-81c96c7dcbe6
                   size: 223GiB
                   capacity: 223GiB
                   capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
                   configuration: created=2008-04-14 19:23:05 filesystem=ext3 modified=2008-04-14 16:02:18 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2008-04-14 15:51:28 state=mounted
              *-volume:1
                   description: Extended partition
                   physical id: 2
                   bus info: scsi@1:0.0.0,2
                   logical name: /dev/sda2
                   size: 9703MiB
                   capacity: 9703MiB
                   capabilities: primary extended partitioned partitioned:extended
                 *-logicalvolume
                      description: Linux swap / Solaris partition
                      physical id: 5
                      logical name: /dev/sda5
                      capacity: 9703MiB
                      capabilities: nofs
== Network ==
=== ifconfig ===
eth0      Link encap:Ethernet  HWaddr 00:0f:fe:5f:3d:87
          inet addr:172.28.1.173  Bcast:172.28.255.255  Mask:255.255.0.0
          inet6 addr: fe80::20f:feff:fe5f:3d87/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:309169 errors:0 dropped:0 overruns:0 frame:0
          TX packets:166880 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:436395533 (416.1 MB)  TX bytes:18501063 (17.6 MB)
          Base address:0x1000 Memory:f0500000-f0520000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:4703 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4703 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:320292 (312.7 KB)  TX bytes:320292 (312.7 KB)
=== iwconfig ===
lo        no wireless extensions.
eth0      no wireless extensions.
=== ip link ===
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:0f:fe:5f:3d:87 brd ff:ff:ff:ff:ff:ff
=== ip addr ===
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:0f:fe:5f:3d:87 brd ff:ff:ff:ff:ff:ff
    inet 172.28.1.173/16 brd 172.28.255.255 scope global eth0
    inet6 fe80::20f:feff:fe5f:3d87/64 scope link
       valid_lft forever preferred_lft forever
=== ip route ===
172.28.0.0/16 dev eth0  proto kernel  scope link  src 172.28.1.173
169.254.0.0/16 dev eth0  scope link  metric 1000
default via 172.28.1.254 dev eth0
=== ip rule ===
0:	from all lookup local
32766:	from all lookup main
32767:	from all lookup default
=== ip neigh ===
172.28.2.69 dev eth0 lladdr 00:19:b9:cc:ed:50 STALE
172.28.1.254 dev eth0 lladdr 00:a0:8e:a6:96:fa STALE
=== ip tunnel ===
=== ip maddr ===
1:	lo
	inet  224.0.0.1
	inet6 ff02::1
2:	eth0
	link  33:33:ff:5f:3d:87
	link  33:33:00:00:00:01
	link  01:00:5e:00:00:fb
	link  01:00:5e:00:00:01
	inet  224.0.0.251
	inet  224.0.0.1
	inet6 ff02::1:ff5f:3d87
	inet6 ff02::1
=== ip mroute ===
== Software ==
=== dpkg --list linux-image* xserver-xorg hal ===
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-f/Unpacked/Failed-cfg/Half-inst/t-aWait/T-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name                                       Version                       Description
+++-==========================================-=============================-============================================
ii  hal                                        0.5.11~rc2-1ubuntu6           Hardware Abstraction Layer
un  linux-image                                <none>                        (no description available)
un  linux-image-2.6                            <none>                        (no description available)
ii  linux-image-2.6.24-12-generic              2.6.24-12.22                  Linux kernel image for version 2.6.24 on x86
ii  linux-image-2.6.24-16-generic              2.6.24-16.30                  Linux kernel image for version 2.6.24 on x86
ii  linux-image-generic                        2.6.24.16.18                  Generic Linux kernel image
ii  xserver-xorg                               1:7.3+10ubuntu8               the X.Org X server
=== grep -v ^# /etc/apt/sources.list ===
deb http://fi.archive.ubuntu.com/ubuntu/ hardy main restricted
deb-src http://fi.archive.ubuntu.com/ubuntu/ hardy main restricted
deb http://fi.archive.ubuntu.com/ubuntu/ hardy-updates main restricted
deb-src http://fi.archive.ubuntu.com/ubuntu/ hardy-updates main restricted
deb http://fi.archive.ubuntu.com/ubuntu/ hardy universe
deb-src http://fi.archive.ubuntu.com/ubuntu/ hardy universe
deb http://fi.archive.ubuntu.com/ubuntu/ hardy-updates universe
deb-src http://fi.archive.ubuntu.com/ubuntu/ hardy-updates universe
deb http://fi.archive.ubuntu.com/ubuntu/ hardy multiverse
deb-src http://fi.archive.ubuntu.com/ubuntu/ hardy multiverse
deb http://fi.archive.ubuntu.com/ubuntu/ hardy-updates multiverse
deb-src http://fi.archive.ubuntu.com/ubuntu/ hardy-updates multiverse
deb http://security.ubuntu.com/ubuntu hardy-security main restricted
deb-src http://security.ubuntu.com/ubuntu hardy-security main restricted
deb http://security.ubuntu.com/ubuntu hardy-security universe
deb-src http://security.ubuntu.com/ubuntu hardy-security universe
deb http://security.ubuntu.com/ubuntu hardy-security multiverse
deb-src http://security.ubuntu.com/ubuntu hardy-security multiverse
=== cat /etc/apt/sources.list.d/* ===
cat: /etc/apt/sources.list.d/*: No such file or directory
=== dpkg --list xresprobe dmidecode lshw vbetool smartmontools ===
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-f/Unpacked/Failed-cfg/Half-inst/t-aWait/T-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name                                       Version                       Description
+++-==========================================-=============================-============================================
ii  dmidecode                                  2.9-1ubuntu1                  Dump Desktop Management Interface data
ii  lshw                                       02.12.01-2ubuntu1             information about hardware configuration
ii  vbetool                                    1.0-1.1                       run real-mode video BIOS code to alter hardw
pn  xresprobe                                  <none>                        (no description available)
No packages found matching smartmontools.
=== tail /var/log/apache/error.log ===
tail: cannot open `/var/log/apache/error.log' for reading: No such file or directory
=== tail /var/log/apache2/error.log ===
[Mon Apr 14 21:04:03 2008] [error] [client 172.28.1.173] File does not exist: /var/www/favicon.ico
[Mon Apr 14 21:04:03 2008] [error] [client 172.28.1.173] File does not exist: /var/www/favicon.ico
[Mon Apr 14 21:10:51 2008] [notice] SIGUSR1 received.  Doing graceful restart
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Mon Apr 14 21:10:51 2008] [notice] Apache/2.2.8 (Ubuntu) mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations
[Mon Apr 14 21:11:19 2008] [error] [client 127.0.0.1] Invalid method in request x80dx01x03x01
[Mon Apr 14 21:11:55 2008] [error] [client 172.28.1.173] Invalid method in request x16x03x01
[Mon Apr 14 21:12:03 2008] [error] [client 127.0.0.1] Invalid method in request x16x03x01
[Mon Apr 14 21:12:06 2008] [error] [client 127.0.0.1] Invalid method in request x16x03x01
[Mon Apr 14 21:12:18 2008] [error] [client 127.0.0.1] Invalid method in request x16x03x01
== Specific ==
=== lsmod ===
Module                  Size  Used by
ipv6                  311720  12
af_packet              27272  2
i915                   38144  2
drm                   106152  3 i915
rfcomm                 47392  2
l2cap                  28800  13 rfcomm
bluetooth              67748  4 rfcomm,l2cap
ppdev                  11400  0
acpi_cpufreq           10832  0
cpufreq_ondemand       11152  2
cpufreq_conservative    10632  0
cpufreq_userspace       6180  0
cpufreq_stats           8416  0
freq_table              6464  3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave       3200  0
container               6656  0
sbs                    17808  0
sbshc                   8960  1 sbs
dock                   12960  0
battery                16776  0
iptable_filter          4608  0
ip_tables              24104  1 iptable_filter
x_tables               23560  1 ip_tables
ac                      8328  0
lp                     14916  0
snd_hda_intel         440408  3
snd_pcm_oss            47648  0
snd_mixer_oss          20224  1 snd_pcm_oss
snd_pcm                92168  2 snd_hda_intel,snd_pcm_oss
snd_page_alloc         13200  2 snd_hda_intel,snd_pcm
snd_hwdep              12552  1 snd_hda_intel
snd_seq_dummy           5764  0
snd_seq_oss            38912  0
snd_seq_midi           10688  0
snd_rawmidi            29856  1 snd_seq_midi
snd_seq_midi_event     10112  2 snd_seq_oss,snd_seq_midi
snd_seq                63232  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              27912  2 snd_pcm,snd_seq
snd_seq_device         10644  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
serio_raw               9092  0
snd                    70856  17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
heci                   65944  0
video                  23444  0
output                  5632  1 video
wmi_acer               11076  0
parport_pc             41128  1
parport                44300  3 ppdev,lp,parport_pc
button                 10912  0
intel_agp              30624  1
iTCO_wdt               15312  0
iTCO_vendor_support     5764  1 iTCO_wdt
shpchp                 38172  0
pci_hotplug            34608  1 shpchp
soundcore              10400  1 snd
evdev                  14976  4
psmouse                46236  0
pcspkr                  4992  0
ext3                  149264  1
jbd                    57000  1 ext3
mbcache                11392  1 ext3
usbhid                 35168  0
hid                    44992  1 usbhid
sg                     41880  0
sr_mod                 20132  0
sd_mod                 33280  3
cdrom                  41512  1 sr_mod
pata_acpi               9856  0
ata_generic             9988  0
ata_piix               24196  2
libata                176304  3 pata_acpi,ata_generic,ata_piix
scsi_mod              178488  4 sg,sr_mod,sd_mod,libata
floppy                 69096  0
ehci_hcd               41996  0
uhci_hcd               29856  0
usbcore               169904  4 usbhid,ehci_hcd,uhci_hcd
e1000                 137152  0
thermal                19744  0
processor              41448  2 acpi_cpufreq,thermal
fan                     6792  0
fbcon                  46336  0
tileblit                4096  1 fbcon
font                   10112  1 fbcon
bitblit                 7424  1 fbcon
softcursor              3712  1 bitblit
fuse                   56112  3
=== dmidecode ===
# dmidecode 2.9
SMBIOS 2.4 present.
68 structures occupying 2050 bytes.
Table at 0x000EB960.
Handle 0x0001, DMI type 0, 24 bytes
BIOS Information
	Vendor: Hewlett-Packard
	Version: 786E1 v01.10
	Release Date: 04/13/2007
	Address: 0xE0000
	Runtime Size: 128 kB
	ROM Size: 1024 kB
	Characteristics:
		PCI is supported
		PNP is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
		5.25"/360 KB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 KB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		ACPI is supported
		USB legacy is supported
		LS-120 boot is supported
		ATAPI Zip drive boot is supported
		BIOS boot specification is supported
		Function key-initiated network boot is supported
		Targeted content distribution is supported
	BIOS Revision: 1.10
Handle 0x0002, DMI type 1, 27 bytes
System Information
	Manufacturer: Hewlett-Packard
	Product Name: HP Compaq dc7700 Convertible Minitower
	Version:
	Serial Number: CZC7242W1Q
	UUID: F494CF16-151B-DC11-BBDA-FE5F3D87000F
	Wake-up Type: Power Switch
	SKU Number: ET088AV
	Family: 103C_53307F
Handle 0x0003, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: Hewlett-Packard
	Product Name: 0A58h
	Version: Not Specified
	Serial Number: CZC7242W1Q
Handle 0x0004, DMI type 3, 17 bytes
Chassis Information
	Manufacturer: Hewlett-Packard
	Type: Mini Tower
	Lock: Not Present
	Version: Not Specified
	Serial Number: CZC7242W1Q
	Asset Tag: CZC7242W1Q
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: Unknown
	OEM Information: 0x00000000
Handle 0x0005, DMI type 4, 40 bytes
Processor Information
	Socket Designation: XU1 PROCESSOR
	Type: Central Processor
	Family: Pentium 4
	Manufacturer: Intel
	ID: F2 06 00 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 15, Stepping 2
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Hyper-threading technology)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz
	Voltage: 1.2 V
	External Clock: 1066 MHz
	Max Speed: 6000 MHz
	Current Speed: 1867 MHz
	Status: Populated, Enabled
	Upgrade: Other
	L1 Cache Handle: 0x0007
	L2 Cache Handle: 0x0008
	L3 Cache Handle: 0x0009
	Serial Number: Not Specified
	Asset Tag: Not Specified
	Part Number: Not Specified
	Core Count: 2
	Core Enabled: 2
	Thread Count: 2
	Characteristics:
		64-bit capable
Handle 0x0006, DMI type 4, 40 bytes
Processor Information
	Socket Designation: XU2 PROCESSOR
	Type: Central Processor
	Family: Unknown
	Manufacturer: Intel
	ID: 00 00 00 00 00 00 00 00
	Version:
	Voltage: 1.2 V
	External Clock: Unknown
	Max Speed: 6000 MHz
	Current Speed: Unknown
	Status: Unpopulated
	Upgrade: Other
	L1 Cache Handle: Not Provided
	L2 Cache Handle: Not Provided
	L3 Cache Handle: Not Provided
	Serial Number: Not Specified
	Asset Tag: Not Specified
	Part Number: Not Specified
	Characteristics: None
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L1 Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Through
	Location: Internal
	Installed Size: 64 KB
	Maximum Size: 64 KB
	Supported SRAM Types:
		Burst
	Installed SRAM Type: Burst
	Speed: Unknown
	Error Correction Type: Parity
	System Type: Data
	Associativity: 8-way Set-associative
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L2 Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 2048 KB
	Maximum Size: 2048 KB
	Supported SRAM Types:
		Burst
	Installed SRAM Type: Burst
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Unified
	Associativity: 8-way Set-associative
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
	Socket Designation: none
	Configuration: Disabled, Not Socketed, Level 3
	Operational Mode: Unknown
	Location: Unknown
	Installed Size: 0 KB
	Maximum Size: 0 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA0
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA1
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA2
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA3
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SERIAL A
	Internal Connector Type: None
	External Reference Designator: COM A
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SERIAL B
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: PARALLEL
	External Connector Type: DB-25 female
	Port Type: Parallel Port ECP/EPP
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: USB 1
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: USB 2
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: USB 3
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: USB 4
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: USB 5
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: USB 6
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FRONT USB
	Internal Connector Type: Other
	External Reference Designator: USB 7
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FRONT USB
	Internal Connector Type: Other
	External Reference Designator: USB 8
	External Connector Type: Access Bus (USB)
	Port Type: USB
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: KEYBOARD
	External Connector Type: PS/2
	Port Type: Keyboard Port
Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: MOUSE
	External Connector Type: PS/2
	Port Type: Mouse Port
Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: REAR MIC
	External Connector Type: Mini DIN
	Port Type: Audio Port
Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: REAR LINE IN
	External Connector Type: Mini DIN
	Port Type: Audio Port
Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: VIDEO
	External Connector Type: DB-15 female
	Port Type: Video Port
Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: REAR HEADPHONE/LINEOUT
	External Connector Type: Mini DIN
	Port Type: Audio Port
Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: RJ45
	External Connector Type: RJ-45
	Port Type: Network Port
Handle 0x0025, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CPU FAN
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x0026, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FLOPPY
	Internal Connector Type: On Board Floppy
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: None
Handle 0x0027, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FRNT AUD
	Internal Connector Type: Other
	External Reference Designator: FRONT HEADPHONE/LINEOUT & MIC
	External Connector Type: Mini DIN
	Port Type: Audio Port
Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHASSIS FAN
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x0029, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SPEAKER (SPKR)
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x002B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PASSWORD CLEAR (PSWD)
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x002C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: HOOD SENSE (HSENSE)
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x002D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: HOOD LOCK (HLCK)
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x002E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: POWER BUTTON
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other
Handle 0x002F, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI1
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 1
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported
Handle 0x0030, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI2
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 2
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported
Handle 0x0033, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI EXPRESS x1 SLOT/PCIEx1
	Type: x1 PCI Express
	Current Usage: Available
	Length: Long
	ID: 1
	Characteristics:
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported
Handle 0x0034, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI EXPRESS x16 SLOT/PCIEx16
	Type: x16 PCI Express
	Current Usage: Available
	Length: Long
	ID: 1
	Characteristics:
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported
Handle 0x0036, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 1
		en|US|iso8859-1
	Currently Installed Language: en|US|iso8859-1
Handle 0x0037, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 4 GB
	Error Information Handle: Not Provided
	Number Of Devices: 4
Handle 0x0038, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: Flash Memory
	Error Correction Type: None
	Maximum Capacity: 1 MB
	Error Information Handle: Not Provided
	Number Of Devices: 1
Handle 0x0039, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0037
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: 1
	Locator: XMM1
	Bank Locator: Not Specified
	Type: DDR2
	Type Detail: Synchronous
	Speed: 667 MHz (1.5 ns)
	Manufacturer: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
	Serial Number: 14293808
	Asset Tag: Not Specified
	Part Number: 64T128020HU3SB
Handle 0x003A, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0037
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: 1
	Locator: XMM2
	Bank Locator: Not Specified
	Type: DDR2
	Type Detail: Synchronous
	Speed: 667 MHz (1.5 ns)
	Manufacturer: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
	Serial Number: 11253808
	Asset Tag: Not Specified
	Part Number: 64T128020HU3SB
Handle 0x003B, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0037
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: 2
	Locator: XMM3
	Bank Locator: Not Specified
	Type: DDR2
	Type Detail: Synchronous
	Speed: 667 MHz (1.5 ns)
	Manufacturer: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
	Serial Number: 17263808
	Asset Tag: Not Specified
	Part Number: 64T128020HU3SB
Handle 0x003C, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0037
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: 2
	Locator: XMM4
	Bank Locator: Not Specified
	Type: DDR2
	Type Detail: Synchronous
	Speed: 667 MHz (1.5 ns)
	Manufacturer: JEDEC ID:7F 7F 7F 7F 7F 51 00 00
	Serial Number: 15B13808
	Asset Tag: Not Specified
	Part Number: 64T128020HU3SB
Handle 0x003E, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0038
	Error Information Handle: Not Provided
	Total Width: 2 bits
	Data Width: 2 bits
	Size: 1024 kB
	Form Factor: Chip
	Set: None
	Locator: SYSTEM ROM
	Bank Locator: Not Specified
	Type: Flash
	Type Detail: Non-Volatile
	Speed: Unknown
	Manufacturer: Not Specified
	Serial Number: Not Specified
	Asset Tag: Not Specified
	Part Number: Not Specified
Handle 0x003F, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 4 GB
	Physical Array Handle: 0x0037
	Partition Width: 0
Handle 0x0040, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x000FFF80000
	Ending Address: 0x000FFFFFFFF
	Range Size: 512 kB
	Physical Array Handle: 0x0038
	Partition Width: 0
Handle 0x0041, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0003FFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x0039
	Memory Array Mapped Address Handle: 0x003F
	Partition Row Position: <OUT OF SPEC>
Handle 0x0042, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00040000000
	Ending Address: 0x0007FFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x003A
	Memory Array Mapped Address Handle: 0x003F
	Partition Row Position: 1
Handle 0x0043, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00080000000
	Ending Address: 0x000BFFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x003B
	Memory Array Mapped Address Handle: 0x003F
	Partition Row Position: <OUT OF SPEC>
Handle 0x0044, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x000C0000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x003C
	Memory Array Mapped Address Handle: 0x003F
	Partition Row Position: 1
Handle 0x0045, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x000FFF80000
	Ending Address: 0x000FFFFFFFF
	Range Size: 512 kB
	Physical Device Handle: 0x003E
	Memory Array Mapped Address Handle: 0x0040
	Partition Row Position: 1
Handle 0x0046, DMI type 32, 11 bytes
System Boot Information
	Status: No errors detected
Handle 0x0047, DMI type 129, 8 bytes
OEM-specific Type
	Header and Data:
		81 08 47 00 01 01 02 01
	Strings:
		Intel_ASF
		Intel_ASF_001
Handle 0x0048, DMI type 130, 20 bytes
OEM-specific Type
	Header and Data:
		82 14 48 00 24 41 4D 54 01 01 00 00 01 00 00 00
		00 00 00 00
Handle 0x0049, DMI type 136, 6 bytes
OEM-specific Type
	Header and Data:
		88 06 49 00 5A 5A
Handle 0x004B, DMI type 197, 10 bytes
OEM-specific Type
	Header and Data:
		C5 0A 4B 00 05 00 00 01 FF 01
Handle 0x004C, DMI type 197, 10 bytes
OEM-specific Type
	Header and Data:
		C5 0A 4C 00 06 00 01 00 FF 01
Handle 0x004D, DMI type 207, 9 bytes
OEM-specific Type
	Header and Data:
		CF 09 4D 00 00 00 00 24 00
Handle 0x004E, DMI type 208, 5 bytes
OEM-specific Type
	Header and Data:
		D0 05 4E 00 01
Handle 0x004F, DMI type 127, 4 bytes
End Of Table
=== lspci ===
00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q963/Q965 HECI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DM Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
=== lspci -n ===
00:00.0 0600: 8086:2990 (rev 02)
00:02.0 0300: 8086:2992 (rev 02)
00:03.0 0780: 8086:2994 (rev 02)
00:19.0 0200: 8086:104a (rev 02)
00:1a.0 0c03: 8086:2834 (rev 02)
00:1a.1 0c03: 8086:2835 (rev 02)
00:1a.7 0c03: 8086:283a (rev 02)
00:1b.0 0403: 8086:284b (rev 02)
00:1c.0 0604: 8086:283f (rev 02)
00:1d.0 0c03: 8086:2830 (rev 02)
00:1d.1 0c03: 8086:2831 (rev 02)
00:1d.7 0c03: 8086:2836 (rev 02)
00:1e.0 0604: 8086:244e (rev f2)
00:1f.0 0601: 8086:2814 (rev 02)
00:1f.2 0101: 8086:2820 (rev 02)
=== lspci -v ===
00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at f0400000 (32-bit, non-prefetchable) [size=1M]
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 1100 [size=8]
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
	Capabilities: [d0] Power Management version 2
00:03.0 Communication controller: Intel Corporation 82Q963/Q965 HECI Controller (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at f0525900 (64-bit, non-prefetchable) [size=16]
	Capabilities: [50] Power Management version 3
	Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
00:19.0 Ethernet controller: Intel Corporation 82566DM Gigabit Network Connection (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 2800
	Flags: bus master, fast devsel, latency 0, IRQ 510
	Memory at f0500000 (32-bit, non-prefetchable) [size=128K]
	Memory at f0524000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at 1000 [size=32]
	Capabilities: [c8] Power Management version 2
	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at 1020 [size=32]
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, medium devsel, latency 0, IRQ 21
	I/O ports at 1040 [size=32]
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, medium devsel, latency 0, IRQ 22
	Memory at f0525000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, fast devsel, latency 0, IRQ 21
	Memory at f0520000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
	Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2802
	Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at 1060 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, medium devsel, latency 0, IRQ 21
	I/O ports at 1080 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, medium devsel, latency 0, IRQ 20
	Memory at f0525400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
	Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 2802
00:1f.0 ISA bridge: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Unknown device 2802
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4 [size=1]
	I/O ports at 0170 [size=8]
	I/O ports at 0374 [size=1]
	I/O ports at 10e0 [size=16]
	I/O ports at 10f0 [size=16]
	Capabilities: [70] Power Management version 3
=== lsusb ===
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 03f0:1024 Hewlett-Packard
Bus 001 Device 001: ID 0000:0000
== Disks ==
=== fdisk -l ===
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x15a8dfb5
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1       29164   234259798+  83  Linux
/dev/sda2           29165       30401     9936202+   5  Extended
/dev/sda5           29165       30401     9936171   82  Linux swap / Solaris
=== mount ===
/dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.24-16-generic/volatile type tmpfs (rw)
securityfs on /sys/kernel/security type securityfs (rw)
gvfs-fuse-daemon on /home/tkarvine/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tkarvine)
=== cat /etc/fstab ===
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/sda1
UUID=06c33f0b-62fe-41d1-b645-81c96c7dcbe6 /               ext3    relatime,errors=remount-ro 0       1
# /dev/sda5
UUID=e67343a4-30e5-4467-ae1b-b38000bb1162 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
=== grep /dev/sda /etc/fstab ===
# /dev/sda1
# /dev/sda5
=== smartctl -a /dev/sda ===
./machinotero: line 11: smartctl: command not found
=== tune2fs -l /dev/sda1 ===
tune2fs 1.40.8 (13-Mar-2008)
Filesystem volume name:   <none>
Last mounted on:          <not available>
Filesystem UUID:          06c33f0b-62fe-41d1-b645-81c96c7dcbe6
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal resize_inode dir_index filetype needs_recovery sparse_super large_file
Filesystem flags:         signed_directory_hash
Default mount options:    (none)
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              29294592
Block count:              58564949
Reserved block count:     2928247
Free blocks:              56733726
Free inodes:              29166917
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      1010
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         16384
Inode blocks per group:   512
Filesystem created:       Mon Apr 14 19:23:05 2008
Last mount time:          Mon Apr 14 16:02:59 2008
Last write time:          Mon Apr 14 16:02:59 2008
Mount count:              4
Maximum mount count:      28
Last checked:             Mon Apr 14 19:23:05 2008
Check interval:           15552000 (6 months)
Next check after:         Sat Oct 11 19:23:05 2008
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:		  128
Journal inode:            8
First orphan inode:       26837074
Default directory hash:   tea
Directory Hash Seed:      aa5dbd66-584c-4ef1-a445-115afa2eae0c
Journal backup:           inode blocks
=== tune2fs -l /dev/sda2 ===
tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda2
Couldn't find valid filesystem superblock.
tune2fs 1.40.8 (13-Mar-2008)
=== tune2fs -l /dev/sda5 ===
tune2fs: Bad magic number in super-block while trying to open /dev/sda5
Couldn't find valid filesystem superblock.
tune2fs 1.40.8 (13-Mar-2008)
=== grep /dev/sda /var/log/syslog ===
Apr 14 15:51:30 tuuna kernel: [   44.615393] Adding 9936160k swap on /dev/sda5.  Priority:-1 extents:1 across:9936160k
Apr 14 16:03:01 tuuna kernel: [   37.764663] Adding 9936160k swap on /dev/sda5.  Priority:-1 extents:1 across:9936160k
== Display ==
=== ddcprobe ===
./machinotero: line 11: ddcprobe: command not found
=== vbetool vbefp panelsize ===
Panel id function not supported
== Long ==
=== dmesg ===
[    0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] Command line: root=UUID=06c33f0b-62fe-41d1-b645-81c96c7dcbe6 ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000df7b1d00 (usable)
[    0.000000]  BIOS-e820: 00000000df7b1d00 - 00000000df7b3d00 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000df7b3d00 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 915377) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 1146880) 2 entries of 3200 used
[    0.000000] end_pfn_map = 1146880
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000E7610 checksum 0
[    0.000000] ACPI: RSDP 000E7610, 0014 (r0 COMPAQ)
[    0.000000] ACPI: RSDT DF7C3D40, 0040 (r1 HPQOEM SLIC-BPC 20070413             0)
[    0.000000] ACPI: FACP DF7C3DE8, 0074 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: DSDT DF7C4143, 90C5 (r1 COMPAQ DSDT_PRJ        1 MSFT  100000E)
[    0.000000] ACPI: FACS DF7C3D00, 0040
[    0.000000] ACPI: APIC DF7C3E5C, 0068 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: ASF! DF7C3EC4, 0063 (r32 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: MCFG DF7C3F27, 003C (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: TCPA DF7C3F63, 0032 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: SLIC DF7C3F95, 0176 (r1 HPQOEM SLIC-BPC        1             0)
[    0.000000] ACPI: HPET DF7C410B, 0038 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: DMI detected: Hewlett-Packard
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000118000000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 915377) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 1146880) 2 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-0000000118000000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1146880
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   915377
[    0.000000]     0:  1048576 ->  1146880
[    0.000000] On node 0 totalpages: 1013584
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1210 pages reserved
[    0.000000]   DMA zone: 2733 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 897001 pages, LIFO batch:31
[    0.000000]   Normal zone: 1344 pages used for memmap
[    0.000000]   Normal zone: 96960 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0xf808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b1000 - 00000000df7b2000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b2000 - 00000000df7b3000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b3000 - 00000000df7b4000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b4000 - 00000000e0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f4000000
[    0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000f8000000
[    0.000000] swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed40000
[    0.000000] swsusp: Registered nosave memory region: 00000000fed40000 - 00000000fed45000
[    0.000000] swsusp: Registered nosave memory region: 00000000fed45000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 996694
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=06c33f0b-62fe-41d1-b645-81c96c7dcbe6 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   23.115089] time.c: Detected 1860.646 MHz processor.
[   23.116282] Console: colour VGA+ 80x25
[   23.116286] console [tty0] enabled
[   23.116304] Checking aperture...
[   23.116312] Calgary: detecting Calgary via BIOS EBDA area
[   23.116314] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[   23.116316] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   23.147445] Placing software IO TLB between 0x1038000 - 0x5038000
[   23.181619] Memory: 3913044k/4587520k available (2466k kernel code, 141292k reserved, 1309k data, 316k init)
[   23.181650] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   23.260986] Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=7448152)
[   23.261018] Security Framework initialized
[   23.261024] SELinux:  Disabled at boot.
[   23.261035] AppArmor: AppArmor initialized
[   23.261040] Failure registering capabilities with primary security module.
[   23.261488] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   23.263671] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   23.264661] Mount-cache hash table entries: 256
[   23.264800] CPU: L1 I cache: 32K, L1 D cache: 32K
[   23.264803] CPU: L2 cache: 2048K
[   23.264805] CPU 0/0 -> Node 0
[   23.264807] using mwait in idle threads.
[   23.264808] CPU: Physical Processor ID: 0
[   23.264810] CPU: Processor Core ID: 0
[   23.264817] CPU0: Thermal monitoring enabled (TM2)
[   23.264831] SMP alternatives: switching to UP code
[   23.265635] Early unpacking initramfs... done
[   23.631689] ACPI: Core revision 20070126
[   23.631743] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   23.676942] Using local APIC timer interrupts.
[   23.730656] APIC timer calibration result 16612914
[   23.730658] Detected 16.612 MHz APIC timer.
[   23.730733] SMP alternatives: switching to SMP code
[   23.731399] Booting processor 1/2 APIC 0x1
[   23.741648] Initializing CPU#1
[   23.818606] Calibrating delay using timer specific routine.. 3721.31 BogoMIPS (lpj=7442632)
[   23.818613] CPU: L1 I cache: 32K, L1 D cache: 32K
[   23.818615] CPU: L2 cache: 2048K
[   23.818617] CPU 1/1 -> Node 0
[   23.818618] CPU: Physical Processor ID: 0
[   23.818620] CPU: Processor Core ID: 1
[   23.818626] CPU1: Thermal monitoring enabled (TM2)
[   23.818945] Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 02
[   23.818987] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   23.838996] Brought up 2 CPUs
[   23.839068] CPU0 attaching sched-domain:
[   23.839070]  domain 0: span 03
[   23.839072]   groups: 01 02
[   23.839074]   domain 1: span 03
[   23.839076]    groups: 03
[   23.839078] CPU1 attaching sched-domain:
[   23.839079]  domain 0: span 03
[   23.839080]   groups: 02 01
[   23.839083]   domain 1: span 03
[   23.839084]    groups: 03
[   23.839294] net_namespace: 120 bytes
[   23.839663] Time: 13:02:45  Date: 04/14/08
[   23.839686] NET: Registered protocol family 16
[   23.839868] ACPI: bus type pci registered
[   23.839940] PCI: Using configuration type 1
[   23.841215] ACPI: EC: Look up EC in DSDT
[   23.843466] ACPI: Interpreter enabled
[   23.843470] ACPI: (supports S0 S3 S4 S5)
[   23.843483] ACPI: Using IOAPIC for interrupt routing
[   23.848261] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   23.848891] PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
[   23.848895] PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
[   23.849071] PCI: Transparent bridge - 0000:00:1e.0
[   23.849093] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[   23.849433] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCX1._PRT]
[   23.849551] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB_._PRT]
[   23.867210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[   23.867296] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[   23.867385] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[   23.867469] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[   23.867552] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[   23.867638] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[   23.867722] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[   23.867804] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[   23.867926] Linux Plug and Play Support v0.97 (c) Adam Belay
[   23.867953] pnp: PnP ACPI init
[   23.867960] ACPI: bus type pnp registered
[   23.870793] pnp: PnP ACPI: found 16 devices
[   23.870795] ACPI: ACPI bus type pnp unregistered
[   23.871021] PCI: Using ACPI for IRQ routing
[   23.871023] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   23.882668] NET: Registered protocol family 8
[   23.882670] NET: Registered protocol family 20
[   23.882705] PCI-GART: No AMD northbridge found.
[   23.882709] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   23.882713] hpet0: 3 64-bit timers, 14318180 Hz
[   23.883747] AppArmor: AppArmor Filesystem Enabled
[   23.886635] Time: tsc clocksource has been installed.
[   23.886645] Switched to high resolution mode on CPU 0
[   23.887055] Switched to high resolution mode on CPU 1
[   23.894677] system 00:0d: ioport range 0x400-0x41f has been reserved
[   23.894680] system 00:0d: ioport range 0x420-0x43f has been reserved
[   23.894683] system 00:0d: ioport range 0x440-0x45f has been reserved
[   23.894686] system 00:0d: ioport range 0x460-0x47f has been reserved
[   23.894688] system 00:0d: ioport range 0x480-0x48f has been reserved
[   23.894691] system 00:0d: ioport range 0xf800-0xf81f has been reserved
[   23.894694] system 00:0d: ioport range 0xf820-0xf83f has been reserved
[   23.894696] system 00:0d: ioport range 0xf840-0xf85f has been reserved
[   23.894699] system 00:0d: ioport range 0xf860-0xf87f has been reserved
[   23.894702] system 00:0d: ioport range 0xfa00-0xfa3f has been reserved
[   23.894704] system 00:0d: ioport range 0xfc00-0xfc7f has been reserved
[   23.894707] system 00:0d: ioport range 0xfc80-0xfcff has been reserved
[   23.894710] system 00:0d: ioport range 0xfe00-0xfe7f has been reserved
[   23.894712] system 00:0d: ioport range 0xfe80-0xfeff has been reserved
[   23.894718] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
[   23.894720] system 00:0e: ioport range 0xcb0-0xcbf has been reserved
[   23.894726] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[   23.894729] system 00:0f: iomem range 0x100000-0xdfffffff could not be reserved
[   23.894732] system 00:0f: iomem range 0xe4000-0xfffff could not be reserved
[   23.894735] system 00:0f: iomem range 0xfec01000-0xfecfffff could not be reserved
[   23.894738] system 00:0f: iomem range 0xfed00400-0xfed3ffff could not be reserved
[   23.894741] system 00:0f: iomem range 0xfed40000-0xffffffff could not be reserved
[   23.894744] system 00:0f: iomem range 0xf4000000-0xf7ffffff could not be reserved
[   23.894747] system 00:0f: iomem range 0xcd000-0xe3fff has been reserved
[   23.895141] PCI: Bridge: 0000:00:1c.0
[   23.895143]   IO window: disabled.
[   23.895147]   MEM window: disabled.
[   23.895150]   PREFETCH window: disabled.
[   23.895153] PCI: Bridge: 0000:00:1e.0
[   23.895155]   IO window: disabled.
[   23.895158]   MEM window: disabled.
[   23.895161]   PREFETCH window: disabled.
[   23.895181] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   23.895190] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   23.895198] NET: Registered protocol family 2
[   23.930788] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   23.932020] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[   23.935837] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   23.936316] TCP: Hash tables configured (established 524288 bind 65536)
[   23.936318] TCP reno registered
[   23.946764] checking if image is initramfs... it is
[   24.669477] Freeing initrd memory: 7519k freed
[   24.673302] audit: initializing netlink socket (disabled)
[   24.673321] audit(1208178165.496:1): initialized
[   24.675473] VFS: Disk quotas dquot_6.5.1
[   24.675537] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   24.675654] io scheduler noop registered
[   24.675656] io scheduler anticipatory registered
[   24.675658] io scheduler deadline registered
[   24.675754] io scheduler cfq registered (default)
[   24.675763] Boot video device is 0000:00:02.0
[   24.677863] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   24.677899] assign_interrupt_mode Found MSI capability
[   24.677930] Allocate Port Service[0000:00:1c.0:pcie00]
[   24.677967] Allocate Port Service[0000:00:1c.0:pcie02]
[   24.701731] Real Time Clock Driver v1.12ac
[   24.701896] hpet_resources: 0xfed00000 is busy
[   24.701926] Linux agpgart interface v0.102
[   24.701928] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   24.702046] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   24.702891] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   24.703591] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   24.703652] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   24.703746] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[   24.706453] serio: i8042 KBD port at 0x60,0x64 irq 1
[   24.706457] serio: i8042 AUX port at 0x60,0x64 irq 12
[   24.718231] mice: PS/2 mouse device common for all mice
[   24.718271] cpuidle: using governor ladder
[   24.718274] cpuidle: using governor menu
[   24.718411] NET: Registered protocol family 1
[   24.718455] registered taskstats version 1
[   24.718536]   Magic number: 4:378:28
[   24.718540]   hash matches device ttydb
[   24.718610] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   24.718613] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   24.718615] EDD information not available.
[   24.718621] Freeing unused kernel memory: 316k freed
[   25.905933] fuse init (API version 7.9)
[   25.920745] ACPI: SSDT DF7CE637, 0320 (r1 COMPAQ  CPU_TM2        1 MSFT  100000E)
[   25.920958] ACPI: Processor [CPU0] (supports 8 throttling states)
[   25.921089] ACPI: Processor [CPU1] (supports 8 throttling states)
[   25.921102] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   25.921112] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   26.150375] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   26.150379] Copyright (c) 1999-2006 Intel Corporation.
[   26.150425] ACPI: PCI Interrupt 0000:00:19.0[B] -> GSI 19 (level, low) -> IRQ 19
[   26.150435] PCI: Setting latency timer of device 0000:00:19.0 to 64
[   26.155728] usbcore: registered new interface driver usbfs
[   26.155749] usbcore: registered new interface driver hub
[   26.155773] usbcore: registered new device driver usb
[   26.156440] USB Universal Host Controller Interface driver v3.0
[   26.181733] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0f:fe:5f:3d:87
[   26.275092] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   26.279213] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[   26.279222] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   26.279225] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   26.279421] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   26.279447] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001020
[   26.279563] usb usb1: configuration #1 chosen from 1 choice
[   26.279583] hub 1-0:1.0: USB hub found
[   26.279589] hub 1-0:1.0: 2 ports detected
[   26.281952] SCSI subsystem initialized
[   26.304895] FDC 0 is a post-1991 82077
[   26.305719] libata version 3.00 loaded.
[   26.382008] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[   26.382019] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   26.382022] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   26.382045] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   26.382070] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001040
[   26.382167] usb usb2: configuration #1 chosen from 1 choice
[   26.382187] hub 2-0:1.0: USB hub found
[   26.382192] hub 2-0:1.0: 2 ports detected
[   26.485933] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[   26.485944] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   26.485947] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   26.485967] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   26.485989] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001060
[   26.486082] usb usb3: configuration #1 chosen from 1 choice
[   26.486102] hub 3-0:1.0: USB hub found
[   26.486107] hub 3-0:1.0: 2 ports detected
[   26.589893] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[   26.589903] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   26.589907] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   26.589929] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   26.589950] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001080
[   26.590045] usb usb4: configuration #1 chosen from 1 choice
[   26.590065] hub 4-0:1.0: USB hub found
[   26.590070] hub 4-0:1.0: 2 ports detected
[   26.621785] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   26.694002] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[   26.694491] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   26.694497] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   26.694541] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
[   26.698461] ehci_hcd 0000:00:1a.7: debug port 1
[   26.698467] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   26.698476] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0525000
[   26.748702] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.748824] usb usb5: configuration #1 chosen from 1 choice
[   26.748849] hub 5-0:1.0: USB hub found
[   26.748856] hub 5-0:1.0: 4 ports detected
[   26.852723] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[   26.853243] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   26.853248] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   26.853293] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
[   26.857199] ehci_hcd 0000:00:1d.7: debug port 1
[   26.857205] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   26.857211] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0525400
[   26.872595] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.872699] usb usb6: configuration #1 chosen from 1 choice
[   26.872723] hub 6-0:1.0: USB hub found
[   26.872729] hub 6-0:1.0: 4 ports detected
[   26.976628] ata_piix 0000:00:1f.2: version 2.12
[   26.976633] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   27.132468] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
[   27.132500] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   27.133089] scsi0 : ata_piix
[   27.133281] scsi1 : ata_piix
[   27.133434] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x10e0 irq 14
[   27.133437] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x10e8 irq 15
[   27.144433] usb 1-1: device not accepting address 2, error -71
[   27.488368] ata1.01: ATAPI: ATAPI   DVD A  DH16A1L, KH37, max UDMA/100
[   27.676220] ata1.01: configured for UDMA/100
[   27.779966] usb 1-1: new full speed USB device using uhci_hcd and address 4
[   27.840123] ata2.00: ATA-7: WDC WD2500JS-60MHB5, 10.02E04, max UDMA/100
[   27.840126] ata2.00: 488397168 sectors, multi 16: LBA48
[   27.848092] ata2.00: configured for UDMA/100
[   27.849284] scsi 0:0:1:0: CD-ROM            ATAPI    DVD A  DH16A1L   KH37 PQ: 0 ANSI: 5
[   27.849647] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
[   27.862091] Driver 'sd' needs updating - please use bus_type methods
[   27.863095] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   27.863107] sd 1:0:0:0: [sda] Write Protect is off
[   27.863109] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.863125] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.863176] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   27.863185] sd 1:0:0:0: [sda] Write Protect is off
[   27.863187] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.863202] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.863205]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   27.871280] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   27.871284] Uniform CD-ROM driver Revision: 3.20
[   27.871325] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   27.874742]  sda1 sda2 < sda5 >
[   27.891835] sd 1:0:0:0: [sda] Attached SCSI disk
[   27.898504] sr 0:0:1:0: Attached scsi generic sg0 type 5
[   27.898524] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   27.990498] usb 1-1: configuration #1 chosen from 1 choice
[   28.009229] usbcore: registered new interface driver hiddev
[   28.015462] input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1
[   28.039917] input,hidraw0: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:1a.0-1
[   28.039937] usbcore: registered new interface driver usbhid
[   28.039941] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   28.107251] Attempting manual resume
[   28.107254] swsusp: Resume From Partition 8:5
[   28.107256] PM: Checking swsusp image.
[   28.107401] PM: Resume from disk failed.
[   28.144052] kjournald starting.  Commit interval 5 seconds
[   28.144062] EXT3-fs: mounted filesystem with ordered data mode.
[   35.311930] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   35.823488] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   35.835474] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   35.863537] iTCO_vendor_support: vendor-support=0
[   35.883432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   35.931439] agpgart: Detected an Intel 965Q Chipset.
[   35.932346] agpgart: Detected 7676K stolen memory.
[   35.945393] agpgart: AGP aperture is 256M @ 0xe0000000
[   35.982646] input: Power Button (FF) as /devices/virtual/input/input3
[   36.038318] ACPI: Power Button (FF) [PWRF]
[   36.038396] input: Power Button (CM) as /devices/virtual/input/input4
[   36.102286] ACPI: Power Button (CM) [PBTN]
[   36.102363] ACPI: WMI-Acer: Mapper loaded
[   36.140621] ACPI Exception (video-1542): AE_NOT_FOUND, Evaluating _DOD [20070126]
[   36.140675] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   36.151254] heci: Intel(R) AMT Management Interface - version 3.1.0.31
[   36.151257] heci: Copyright (c) 2003 - 2007 Intel Corporation.
[   36.151301] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[   36.151306] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   36.151908] heci: link layer has been established.
[   36.203208] ACPI: Video Device [GFX0] (multi-head: no  rom: yes  post: no)
[   36.248057] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[   36.254729] heci: heci driver initialization successful.
[   36.304775] iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860)
[   36.304810] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   36.304925] parport_pc 00:07: reported by Plug and Play ACPI
[   36.304979] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   36.669101] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[   36.669584] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   37.684898] lp0: using parport0 (interrupt-driven).
[   37.764663] Adding 9936160k swap on /dev/sda5.  Priority:-1 extents:1 across:9936160k
[   38.315897] EXT3 FS on sda1, internal journal
[   39.423777] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.731976] No dock devices found.
[   40.798077] ppdev: user-space parallel port driver
[   40.913820] audit(1208178182.321:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4881 profile="/usr/sbin/cupsd" namespace="default"
[   41.443631] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   41.528785] Bluetooth: Core ver 2.11
[   41.529181] NET: Registered protocol family 31
[   41.529184] Bluetooth: HCI device and connection manager initialized
[   41.529187] Bluetooth: HCI socket layer initialized
[   41.538123] Bluetooth: L2CAP ver 2.9
[   41.538127] Bluetooth: L2CAP socket layer initialized
[   41.606513] Bluetooth: RFCOMM socket layer initialized
[   41.606526] Bluetooth: RFCOMM TTY layer initialized
[   41.606527] Bluetooth: RFCOMM ver 1.8
[   44.263611] [drm] Initialized drm 1.1.0 20060810
[   44.265626] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   44.265633] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   44.265681] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   45.587748] NET: Registered protocol family 17
[   48.285470] NET: Registered protocol family 10
[   48.285695] lo: Disabled Privacy Extensions
[   59.015571] eth0: no IPv6 routers present
[19402.701006] ppdev0: registered pardevice
[19402.748751] ppdev0: unregistered pardevice
[19402.815271] ppdev0: registered pardevice
[19402.860848] ppdev0: unregistered pardevice
[19406.170363] ppdev0: registered pardevice
[19406.218322] ppdev0: unregistered pardevice
[19562.842975] ppdev0: registered pardevice
[19562.890707] ppdev0: unregistered pardevice
[19562.914186] ppdev0: registered pardevice
[19562.962715] ppdev0: unregistered pardevice
[19566.105491] ppdev0: registered pardevice
[19566.153409] ppdev0: unregistered pardevice
=== dmesg ===
[    0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] Command line: root=UUID=06c33f0b-62fe-41d1-b645-81c96c7dcbe6 ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000df7b1d00 (usable)
[    0.000000]  BIOS-e820: 00000000df7b1d00 - 00000000df7b3d00 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000df7b3d00 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 915377) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 1146880) 2 entries of 3200 used
[    0.000000] end_pfn_map = 1146880
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000E7610 checksum 0
[    0.000000] ACPI: RSDP 000E7610, 0014 (r0 COMPAQ)
[    0.000000] ACPI: RSDT DF7C3D40, 0040 (r1 HPQOEM SLIC-BPC 20070413             0)
[    0.000000] ACPI: FACP DF7C3DE8, 0074 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: DSDT DF7C4143, 90C5 (r1 COMPAQ DSDT_PRJ        1 MSFT  100000E)
[    0.000000] ACPI: FACS DF7C3D00, 0040
[    0.000000] ACPI: APIC DF7C3E5C, 0068 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: ASF! DF7C3EC4, 0063 (r32 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: MCFG DF7C3F27, 003C (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: TCPA DF7C3F63, 0032 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: SLIC DF7C3F95, 0176 (r1 HPQOEM SLIC-BPC        1             0)
[    0.000000] ACPI: HPET DF7C410B, 0038 (r1 COMPAQ BROADH2O        1             0)
[    0.000000] ACPI: DMI detected: Hewlett-Packard
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000118000000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 915377) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 1146880) 2 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-0000000118000000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1146880
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   915377
[    0.000000]     0:  1048576 ->  1146880
[    0.000000] On node 0 totalpages: 1013584
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1210 pages reserved
[    0.000000]   DMA zone: 2733 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 897001 pages, LIFO batch:31
[    0.000000]   Normal zone: 1344 pages used for memmap
[    0.000000]   Normal zone: 96960 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0xf808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b1000 - 00000000df7b2000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b2000 - 00000000df7b3000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b3000 - 00000000df7b4000
[    0.000000] swsusp: Registered nosave memory region: 00000000df7b4000 - 00000000e0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f4000000
[    0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000f8000000
[    0.000000] swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed40000
[    0.000000] swsusp: Registered nosave memory region: 00000000fed40000 - 00000000fed45000
[    0.000000] swsusp: Registered nosave memory region: 00000000fed45000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 996694
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=06c33f0b-62fe-41d1-b645-81c96c7dcbe6 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   23.115089] time.c: Detected 1860.646 MHz processor.
[   23.116282] Console: colour VGA+ 80x25
[   23.116286] console [tty0] enabled
[   23.116304] Checking aperture...
[   23.116312] Calgary: detecting Calgary via BIOS EBDA area
[   23.116314] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[   23.116316] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   23.147445] Placing software IO TLB between 0x1038000 - 0x5038000
[   23.181619] Memory: 3913044k/4587520k available (2466k kernel code, 141292k reserved, 1309k data, 316k init)
[   23.181650] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   23.260986] Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=7448152)
[   23.261018] Security Framework initialized
[   23.261024] SELinux:  Disabled at boot.
[   23.261035] AppArmor: AppArmor initialized
[   23.261040] Failure registering capabilities with primary security module.
[   23.261488] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   23.263671] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   23.264661] Mount-cache hash table entries: 256
[   23.264800] CPU: L1 I cache: 32K, L1 D cache: 32K
[   23.264803] CPU: L2 cache: 2048K
[   23.264805] CPU 0/0 -> Node 0
[   23.264807] using mwait in idle threads.
[   23.264808] CPU: Physical Processor ID: 0
[   23.264810] CPU: Processor Core ID: 0
[   23.264817] CPU0: Thermal monitoring enabled (TM2)
[   23.264831] SMP alternatives: switching to UP code
[   23.265635] Early unpacking initramfs... done
[   23.631689] ACPI: Core revision 20070126
[   23.631743] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   23.676942] Using local APIC timer interrupts.
[   23.730656] APIC timer calibration result 16612914
[   23.730658] Detected 16.612 MHz APIC timer.
[   23.730733] SMP alternatives: switching to SMP code
[   23.731399] Booting processor 1/2 APIC 0x1
[   23.741648] Initializing CPU#1
[   23.818606] Calibrating delay using timer specific routine.. 3721.31 BogoMIPS (lpj=7442632)
[   23.818613] CPU: L1 I cache: 32K, L1 D cache: 32K
[   23.818615] CPU: L2 cache: 2048K
[   23.818617] CPU 1/1 -> Node 0
[   23.818618] CPU: Physical Processor ID: 0
[   23.818620] CPU: Processor Core ID: 1
[   23.818626] CPU1: Thermal monitoring enabled (TM2)
[   23.818945] Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 02
[   23.818987] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   23.838996] Brought up 2 CPUs
[   23.839068] CPU0 attaching sched-domain:
[   23.839070]  domain 0: span 03
[   23.839072]   groups: 01 02
[   23.839074]   domain 1: span 03
[   23.839076]    groups: 03
[   23.839078] CPU1 attaching sched-domain:
[   23.839079]  domain 0: span 03
[   23.839080]   groups: 02 01
[   23.839083]   domain 1: span 03
[   23.839084]    groups: 03
[   23.839294] net_namespace: 120 bytes
[   23.839663] Time: 13:02:45  Date: 04/14/08
[   23.839686] NET: Registered protocol family 16
[   23.839868] ACPI: bus type pci registered
[   23.839940] PCI: Using configuration type 1
[   23.841215] ACPI: EC: Look up EC in DSDT
[   23.843466] ACPI: Interpreter enabled
[   23.843470] ACPI: (supports S0 S3 S4 S5)
[   23.843483] ACPI: Using IOAPIC for interrupt routing
[   23.848261] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   23.848891] PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
[   23.848895] PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
[   23.849071] PCI: Transparent bridge - 0000:00:1e.0
[   23.849093] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[   23.849433] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCX1._PRT]
[   23.849551] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB_._PRT]
[   23.867210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[   23.867296] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[   23.867385] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[   23.867469] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[   23.867552] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[   23.867638] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[   23.867722] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[   23.867804] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[   23.867926] Linux Plug and Play Support v0.97 (c) Adam Belay
[   23.867953] pnp: PnP ACPI init
[   23.867960] ACPI: bus type pnp registered
[   23.870793] pnp: PnP ACPI: found 16 devices
[   23.870795] ACPI: ACPI bus type pnp unregistered
[   23.871021] PCI: Using ACPI for IRQ routing
[   23.871023] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   23.882668] NET: Registered protocol family 8
[   23.882670] NET: Registered protocol family 20
[   23.882705] PCI-GART: No AMD northbridge found.
[   23.882709] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   23.882713] hpet0: 3 64-bit timers, 14318180 Hz
[   23.883747] AppArmor: AppArmor Filesystem Enabled
[   23.886635] Time: tsc clocksource has been installed.
[   23.886645] Switched to high resolution mode on CPU 0
[   23.887055] Switched to high resolution mode on CPU 1
[   23.894677] system 00:0d: ioport range 0x400-0x41f has been reserved
[   23.894680] system 00:0d: ioport range 0x420-0x43f has been reserved
[   23.894683] system 00:0d: ioport range 0x440-0x45f has been reserved
[   23.894686] system 00:0d: ioport range 0x460-0x47f has been reserved
[   23.894688] system 00:0d: ioport range 0x480-0x48f has been reserved
[   23.894691] system 00:0d: ioport range 0xf800-0xf81f has been reserved
[   23.894694] system 00:0d: ioport range 0xf820-0xf83f has been reserved
[   23.894696] system 00:0d: ioport range 0xf840-0xf85f has been reserved
[   23.894699] system 00:0d: ioport range 0xf860-0xf87f has been reserved
[   23.894702] system 00:0d: ioport range 0xfa00-0xfa3f has been reserved
[   23.894704] system 00:0d: ioport range 0xfc00-0xfc7f has been reserved
[   23.894707] system 00:0d: ioport range 0xfc80-0xfcff has been reserved
[   23.894710] system 00:0d: ioport range 0xfe00-0xfe7f has been reserved
[   23.894712] system 00:0d: ioport range 0xfe80-0xfeff has been reserved
[   23.894718] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
[   23.894720] system 00:0e: ioport range 0xcb0-0xcbf has been reserved
[   23.894726] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[   23.894729] system 00:0f: iomem range 0x100000-0xdfffffff could not be reserved
[   23.894732] system 00:0f: iomem range 0xe4000-0xfffff could not be reserved
[   23.894735] system 00:0f: iomem range 0xfec01000-0xfecfffff could not be reserved
[   23.894738] system 00:0f: iomem range 0xfed00400-0xfed3ffff could not be reserved
[   23.894741] system 00:0f: iomem range 0xfed40000-0xffffffff could not be reserved
[   23.894744] system 00:0f: iomem range 0xf4000000-0xf7ffffff could not be reserved
[   23.894747] system 00:0f: iomem range 0xcd000-0xe3fff has been reserved
[   23.895141] PCI: Bridge: 0000:00:1c.0
[   23.895143]   IO window: disabled.
[   23.895147]   MEM window: disabled.
[   23.895150]   PREFETCH window: disabled.
[   23.895153] PCI: Bridge: 0000:00:1e.0
[   23.895155]   IO window: disabled.
[   23.895158]   MEM window: disabled.
[   23.895161]   PREFETCH window: disabled.
[   23.895181] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   23.895190] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   23.895198] NET: Registered protocol family 2
[   23.930788] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   23.932020] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[   23.935837] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   23.936316] TCP: Hash tables configured (established 524288 bind 65536)
[   23.936318] TCP reno registered
[   23.946764] checking if image is initramfs... it is
[   24.669477] Freeing initrd memory: 7519k freed
[   24.673302] audit: initializing netlink socket (disabled)
[   24.673321] audit(1208178165.496:1): initialized
[   24.675473] VFS: Disk quotas dquot_6.5.1
[   24.675537] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   24.675654] io scheduler noop registered
[   24.675656] io scheduler anticipatory registered
[   24.675658] io scheduler deadline registered
[   24.675754] io scheduler cfq registered (default)
[   24.675763] Boot video device is 0000:00:02.0
[   24.677863] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   24.677899] assign_interrupt_mode Found MSI capability
[   24.677930] Allocate Port Service[0000:00:1c.0:pcie00]
[   24.677967] Allocate Port Service[0000:00:1c.0:pcie02]
[   24.701731] Real Time Clock Driver v1.12ac
[   24.701896] hpet_resources: 0xfed00000 is busy
[   24.701926] Linux agpgart interface v0.102
[   24.701928] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   24.702046] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   24.702891] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   24.703591] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   24.703652] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   24.703746] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[   24.706453] serio: i8042 KBD port at 0x60,0x64 irq 1
[   24.706457] serio: i8042 AUX port at 0x60,0x64 irq 12
[   24.718231] mice: PS/2 mouse device common for all mice
[   24.718271] cpuidle: using governor ladder
[   24.718274] cpuidle: using governor menu
[   24.718411] NET: Registered protocol family 1
[   24.718455] registered taskstats version 1
[   24.718536]   Magic number: 4:378:28
[   24.718540]   hash matches device ttydb
[   24.718610] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   24.718613] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   24.718615] EDD information not available.
[   24.718621] Freeing unused kernel memory: 316k freed
[   25.905933] fuse init (API version 7.9)
[   25.920745] ACPI: SSDT DF7CE637, 0320 (r1 COMPAQ  CPU_TM2        1 MSFT  100000E)
[   25.920958] ACPI: Processor [CPU0] (supports 8 throttling states)
[   25.921089] ACPI: Processor [CPU1] (supports 8 throttling states)
[   25.921102] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   25.921112] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   26.150375] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   26.150379] Copyright (c) 1999-2006 Intel Corporation.
[   26.150425] ACPI: PCI Interrupt 0000:00:19.0[B] -> GSI 19 (level, low) -> IRQ 19
[   26.150435] PCI: Setting latency timer of device 0000:00:19.0 to 64
[   26.155728] usbcore: registered new interface driver usbfs
[   26.155749] usbcore: registered new interface driver hub
[   26.155773] usbcore: registered new device driver usb
[   26.156440] USB Universal Host Controller Interface driver v3.0
[   26.181733] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0f:fe:5f:3d:87
[   26.275092] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   26.279213] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[   26.279222] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   26.279225] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   26.279421] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   26.279447] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001020
[   26.279563] usb usb1: configuration #1 chosen from 1 choice
[   26.279583] hub 1-0:1.0: USB hub found
[   26.279589] hub 1-0:1.0: 2 ports detected
[   26.281952] SCSI subsystem initialized
[   26.304895] FDC 0 is a post-1991 82077
[   26.305719] libata version 3.00 loaded.
[   26.382008] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[   26.382019] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   26.382022] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   26.382045] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   26.382070] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001040
[   26.382167] usb usb2: configuration #1 chosen from 1 choice
[   26.382187] hub 2-0:1.0: USB hub found
[   26.382192] hub 2-0:1.0: 2 ports detected
[   26.485933] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[   26.485944] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   26.485947] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   26.485967] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   26.485989] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001060
[   26.486082] usb usb3: configuration #1 chosen from 1 choice
[   26.486102] hub 3-0:1.0: USB hub found
[   26.486107] hub 3-0:1.0: 2 ports detected
[   26.589893] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[   26.589903] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   26.589907] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   26.589929] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   26.589950] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001080
[   26.590045] usb usb4: configuration #1 chosen from 1 choice
[   26.590065] hub 4-0:1.0: USB hub found
[   26.590070] hub 4-0:1.0: 2 ports detected
[   26.621785] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   26.694002] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[   26.694491] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   26.694497] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   26.694541] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
[   26.698461] ehci_hcd 0000:00:1a.7: debug port 1
[   26.698467] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   26.698476] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0525000
[   26.748702] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.748824] usb usb5: configuration #1 chosen from 1 choice
[   26.748849] hub 5-0:1.0: USB hub found
[   26.748856] hub 5-0:1.0: 4 ports detected
[   26.852723] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[   26.853243] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   26.853248] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   26.853293] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
[   26.857199] ehci_hcd 0000:00:1d.7: debug port 1
[   26.857205] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   26.857211] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0525400
[   26.872595] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.872699] usb usb6: configuration #1 chosen from 1 choice
[   26.872723] hub 6-0:1.0: USB hub found
[   26.872729] hub 6-0:1.0: 4 ports detected
[   26.976628] ata_piix 0000:00:1f.2: version 2.12
[   26.976633] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   27.132468] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
[   27.132500] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   27.133089] scsi0 : ata_piix
[   27.133281] scsi1 : ata_piix
[   27.133434] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x10e0 irq 14
[   27.133437] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x10e8 irq 15
[   27.144433] usb 1-1: device not accepting address 2, error -71
[   27.488368] ata1.01: ATAPI: ATAPI   DVD A  DH16A1L, KH37, max UDMA/100
[   27.676220] ata1.01: configured for UDMA/100
[   27.779966] usb 1-1: new full speed USB device using uhci_hcd and address 4
[   27.840123] ata2.00: ATA-7: WDC WD2500JS-60MHB5, 10.02E04, max UDMA/100
[   27.840126] ata2.00: 488397168 sectors, multi 16: LBA48
[   27.848092] ata2.00: configured for UDMA/100
[   27.849284] scsi 0:0:1:0: CD-ROM            ATAPI    DVD A  DH16A1L   KH37 PQ: 0 ANSI: 5
[   27.849647] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
[   27.862091] Driver 'sd' needs updating - please use bus_type methods
[   27.863095] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   27.863107] sd 1:0:0:0: [sda] Write Protect is off
[   27.863109] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.863125] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.863176] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   27.863185] sd 1:0:0:0: [sda] Write Protect is off
[   27.863187] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.863202] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.863205]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   27.871280] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   27.871284] Uniform CD-ROM driver Revision: 3.20
[   27.871325] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   27.874742]  sda1 sda2 < sda5 >
[   27.891835] sd 1:0:0:0: [sda] Attached SCSI disk
[   27.898504] sr 0:0:1:0: Attached scsi generic sg0 type 5
[   27.898524] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   27.990498] usb 1-1: configuration #1 chosen from 1 choice
[   28.009229] usbcore: registered new interface driver hiddev
[   28.015462] input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1
[   28.039917] input,hidraw0: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:1a.0-1
[   28.039937] usbcore: registered new interface driver usbhid
[   28.039941] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   28.107251] Attempting manual resume
[   28.107254] swsusp: Resume From Partition 8:5
[   28.107256] PM: Checking swsusp image.
[   28.107401] PM: Resume from disk failed.
[   28.144052] kjournald starting.  Commit interval 5 seconds
[   28.144062] EXT3-fs: mounted filesystem with ordered data mode.
[   35.311930] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   35.823488] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   35.835474] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   35.863537] iTCO_vendor_support: vendor-support=0
[   35.883432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   35.931439] agpgart: Detected an Intel 965Q Chipset.
[   35.932346] agpgart: Detected 7676K stolen memory.
[   35.945393] agpgart: AGP aperture is 256M @ 0xe0000000
[   35.982646] input: Power Button (FF) as /devices/virtual/input/input3
[   36.038318] ACPI: Power Button (FF) [PWRF]
[   36.038396] input: Power Button (CM) as /devices/virtual/input/input4
[   36.102286] ACPI: Power Button (CM) [PBTN]
[   36.102363] ACPI: WMI-Acer: Mapper loaded
[   36.140621] ACPI Exception (video-1542): AE_NOT_FOUND, Evaluating _DOD [20070126]
[   36.140675] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   36.151254] heci: Intel(R) AMT Management Interface - version 3.1.0.31
[   36.151257] heci: Copyright (c) 2003 - 2007 Intel Corporation.
[   36.151301] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[   36.151306] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   36.151908] heci: link layer has been established.
[   36.203208] ACPI: Video Device [GFX0] (multi-head: no  rom: yes  post: no)
[   36.248057] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[   36.254729] heci: heci driver initialization successful.
[   36.304775] iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860)
[   36.304810] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   36.304925] parport_pc 00:07: reported by Plug and Play ACPI
[   36.304979] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   36.669101] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[   36.669584] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   37.684898] lp0: using parport0 (interrupt-driven).
[   37.764663] Adding 9936160k swap on /dev/sda5.  Priority:-1 extents:1 across:9936160k
[   38.315897] EXT3 FS on sda1, internal journal
[   39.423777] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.731976] No dock devices found.
[   40.798077] ppdev: user-space parallel port driver
[   40.913820] audit(1208178182.321:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4881 profile="/usr/sbin/cupsd" namespace="default"
[   41.443631] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   41.528785] Bluetooth: Core ver 2.11
[   41.529181] NET: Registered protocol family 31
[   41.529184] Bluetooth: HCI device and connection manager initialized
[   41.529187] Bluetooth: HCI socket layer initialized
[   41.538123] Bluetooth: L2CAP ver 2.9
[   41.538127] Bluetooth: L2CAP socket layer initialized
[   41.606513] Bluetooth: RFCOMM socket layer initialized
[   41.606526] Bluetooth: RFCOMM TTY layer initialized
[   41.606527] Bluetooth: RFCOMM ver 1.8
[   44.263611] [drm] Initialized drm 1.1.0 20060810
[   44.265626] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   44.265633] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   44.265681] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   45.587748] NET: Registered protocol family 17
[   48.285470] NET: Registered protocol family 10
[   48.285695] lo: Disabled Privacy Extensions
[   59.015571] eth0: no IPv6 routers present
[19402.701006] ppdev0: registered pardevice
[19402.748751] ppdev0: unregistered pardevice
[19402.815271] ppdev0: registered pardevice
[19402.860848] ppdev0: unregistered pardevice
[19406.170363] ppdev0: registered pardevice
[19406.218322] ppdev0: unregistered pardevice
[19562.842975] ppdev0: registered pardevice
[19562.890707] ppdev0: unregistered pardevice
[19562.914186] ppdev0: registered pardevice
[19562.962715] ppdev0: unregistered pardevice
[19566.105491] ppdev0: registered pardevice
[19566.153409] ppdev0: unregistered pardevice
=== head -25 /var/log/syslog ===
Apr 14 15:07:45 tuuna syslogd 1.5.0#1ubuntu1: restart.
Apr 14 15:07:45 tuuna anacron[5409]: Job `cron.daily' terminated
Apr 14 15:17:03 tuuna /USR/SBIN/CRON[9875]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Apr 14 15:20:49 tuuna avahi-daemon[5044]: Files changed, reloading.
Apr 14 15:20:49 tuuna avahi-daemon[5044]: No service file found in /etc/avahi/services.
Apr 14 15:20:49 tuuna avahi-daemon[5044]: Got SIGTERM, quitting.
Apr 14 15:20:49 tuuna avahi-daemon[5044]: Leaving mDNS multicast group on interface eth0.IPv4 with address 172.28.1.173.
Apr 14 15:20:55 tuuna hcid[5288]: Stopping SDP server
Apr 14 15:20:55 tuuna input[5306]: Unregistered manager path
Apr 14 15:20:55 tuuna input[5306]: Exit
Apr 14 15:20:55 tuuna hcid[5288]: Unregister path: /org/bluez
Apr 14 15:20:55 tuuna hcid[5288]: Shutting down local server
Apr 14 15:20:55 tuuna hcid[5288]: Exit
Apr 14 15:20:55 tuuna audio[5307]: Removing service record 0x10000 failed: The name org.bluez was not provided by any .service files
Apr 14 15:20:55 tuuna audio[5307]: Unregistered manager path
Apr 14 15:20:55 tuuna audio[5307]: Exit
Apr 14 15:23:39 tuuna init: Re-executing /sbin/init
Apr 14 15:25:13 tuuna AppArmor(init): Skipping profile /etc/apparmor.d/usr.sbin.cupsd.dpkg-new
Apr 14 15:25:13 tuuna AppArmor(init): Skipping profile /etc/apparmor.d/usr.sbin.cupsd.dpkg-new
Apr 14 15:25:14 tuuna /usr/sbin/cron[24018]: (CRON) INFO (pidfile fd = 3)
Apr 14 15:25:14 tuuna /usr/sbin/cron[24019]: (CRON) STARTUP (fork ok)
Apr 14 15:25:14 tuuna /usr/sbin/cron[24019]: (CRON) INFO (Skipping @reboot jobs -- not system startup)
Apr 14 15:25:32 tuuna avahi-daemon[24694]: Found user 'avahi' (UID 108) and group 'avahi' (GID 119).
Apr 14 15:25:32 tuuna avahi-daemon[24694]: Successfully dropped root privileges.
Apr 14 15:25:32 tuuna avahi-daemon[24694]: avahi-daemon 0.6.22 starting up.
=== tail -25 /var/log/syslog ===
Apr 14 21:03:01 tuuna -- MARK --
Apr 14 21:17:01 tuuna /USR/SBIN/CRON[16888]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Apr 14 21:18:10 tuuna dhclient: DHCPREQUEST of <null address> on eth0 to 172.28.2.69 port 67
Apr 14 21:18:10 tuuna dhclient: DHCPACK of 172.28.1.173 from 172.28.2.69
Apr 14 21:18:10 tuuna NetworkManager: <info>  DHCP daemon state is now 3 (renew) for interface eth0
Apr 14 21:18:10 tuuna dhclient: bound to 172.28.1.173 -- renewal in 3058 seconds.
Apr 14 21:25:57 tuuna kernel: [19402.701006] ppdev0: registered pardevice
Apr 14 21:25:57 tuuna python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 21:25:57 tuuna kernel: [19402.748751] ppdev0: unregistered pardevice
Apr 14 21:25:57 tuuna kernel: [19402.815271] ppdev0: registered pardevice
Apr 14 21:25:57 tuuna hp: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 21:25:57 tuuna kernel: [19402.860848] ppdev0: unregistered pardevice
Apr 14 21:26:00 tuuna kernel: [19406.170363] ppdev0: registered pardevice
Apr 14 21:26:00 tuuna kernel: [19406.218322] ppdev0: unregistered pardevice
Apr 14 21:28:37 tuuna kernel: [19562.842975] ppdev0: registered pardevice
Apr 14 21:28:37 tuuna python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 21:28:37 tuuna kernel: [19562.890707] ppdev0: unregistered pardevice
Apr 14 21:28:37 tuuna kernel: [19562.914186] ppdev0: registered pardevice
Apr 14 21:28:37 tuuna hp: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 21:28:37 tuuna kernel: [19562.962715] ppdev0: unregistered pardevice
Apr 14 21:28:40 tuuna kernel: [19566.105491] ppdev0: registered pardevice
Apr 14 21:28:40 tuuna kernel: [19566.153409] ppdev0: unregistered pardevice
Apr 14 21:28:51 tuuna python: hp-makeuri[17313]: error: Device does not support fax.
Apr 14 21:29:36 tuuna HP_LaserJet_4100_Series?ip=172.28.10.201: prnt/backend/hp.c 496: unable to connect hpssd socket 2207: Connection refused
Apr 14 21:29:46 tuuna HP_LaserJet_4100_Series?ip=172.28.10.201: prnt/backend/hp.c 496: unable to connect hpssd socket 2207: Connection refused
=== cat /etc/X11/xorg.conf ===
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fi"
EndSection
Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"vmmouse"
EndSection
Section "Device"
	Identifier	"Configured Video Device"
EndSection
Section "Monitor"
	Identifier	"Configured Monitor"
EndSection
Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection
Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
EndSection
=== cat /var/log/Xorg.0.log ===
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu7)
Current Operating System: Linux tuuna 2.6.24-16-generic #1 SMP Thu Apr 10 12:47:45 UTC 2008 x86_64
Build Date: 09 April 2008  12:42:26PM
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 16:03:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the first keyboard device.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7bd660
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2990 card 103c,2802 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2992 card 103c,2802 rev 02 class 03,00,00 hdr 00
(II) PCI: 00:03:0: chip 8086,2994 card 103c,2802 rev 02 class 07,80,00 hdr 80
(II) PCI: 00:19:0: chip 8086,104a card 103c,2800 rev 02 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,2802 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,2802 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,2802 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,2802 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,2802 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,2802 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,2802 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev f2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2814 card 103c,2802 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2820 card 103c,2802 rev 02 class 01,01,8a hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 32: bridge is at (0:28:0), (0,32,32), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:30:0), (0,7,7), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82Q963/Q965 Integrated Graphics Controller rev 2, Mem @ 0xf0400000/20, 0xe0000000/28, I/O @ 0x1100/3
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xf0525400 - 0xf05257ff (0x400) MX[B]
	[1] -1	0	0xf0520000 - 0xf0523fff (0x4000) MX[B]
	[2] -1	0	0xf0525000 - 0xf05253ff (0x400) MX[B]
	[3] -1	0	0xf0524000 - 0xf0524fff (0x1000) MX[B]
	[4] -1	0	0xf0500000 - 0xf051ffff (0x20000) MX[B]
	[5] -1	0	0xf0525900 - 0xf052590f (0x10) MX[B]
	[6] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[7] -1	0	0xf0400000 - 0xf04fffff (0x100000) MX[B](B)
	[8] -1	0	0x000010f0 - 0x000010ff (0x10) IX[B]
	[9] -1	0	0x000010e0 - 0x000010ef (0x10) IX[B]
	[10] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[11] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[12] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[13] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[14] -1	0	0x00001080 - 0x0000109f (0x20) IX[B]
	[15] -1	0	0x00001060 - 0x0000107f (0x20) IX[B]
	[16] -1	0	0x00001040 - 0x0000105f (0x20) IX[B]
	[17] -1	0	0x00001020 - 0x0000103f (0x20) IX[B]
	[18] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[19] -1	0	0x00001100 - 0x00001107 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xf0525400 - 0xf05257ff (0x400) MX[B]
	[1] -1	0	0xf0520000 - 0xf0523fff (0x4000) MX[B]
	[2] -1	0	0xf0525000 - 0xf05253ff (0x400) MX[B]
	[3] -1	0	0xf0524000 - 0xf0524fff (0x1000) MX[B]
	[4] -1	0	0xf0500000 - 0xf051ffff (0x20000) MX[B]
	[5] -1	0	0xf0525900 - 0xf052590f (0x10) MX[B]
	[6] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[7] -1	0	0xf0400000 - 0xf04fffff (0x100000) MX[B](B)
	[8] -1	0	0x000010f0 - 0x000010ff (0x10) IX[B]
	[9] -1	0	0x000010e0 - 0x000010ef (0x10) IX[B]
	[10] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[11] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[12] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[13] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[14] -1	0	0x00001080 - 0x0000109f (0x20) IX[B]
	[15] -1	0	0x00001060 - 0x0000107f (0x20) IX[B]
	[16] -1	0	0x00001040 - 0x0000105f (0x20) IX[B]
	[17] -1	0	0x00001020 - 0x0000103f (0x20) IX[B]
	[18] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[19] -1	0	0x00001100 - 0x00001107 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf0525400 - 0xf05257ff (0x400) MX[B]
	[5] -1	0	0xf0520000 - 0xf0523fff (0x4000) MX[B]
	[6] -1	0	0xf0525000 - 0xf05253ff (0x400) MX[B]
	[7] -1	0	0xf0524000 - 0xf0524fff (0x1000) MX[B]
	[8] -1	0	0xf0500000 - 0xf051ffff (0x20000) MX[B]
	[9] -1	0	0xf0525900 - 0xf052590f (0x10) MX[B]
	[10] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[11] -1	0	0xf0400000 - 0xf04fffff (0x100000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x000010f0 - 0x000010ff (0x10) IX[B]
	[15] -1	0	0x000010e0 - 0x000010ef (0x10) IX[B]
	[16] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[17] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[18] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[20] -1	0	0x00001080 - 0x0000109f (0x20) IX[B]
	[21] -1	0	0x00001060 - 0x0000107f (0x20) IX[B]
	[22] -1	0	0x00001040 - 0x0000105f (0x20) IX[B]
	[23] -1	0	0x00001020 - 0x0000103f (0x20) IX[B]
	[24] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[25] -1	0	0x00001100 - 0x00001107 (0x8) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.0.90, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched intel from file name intel.ids in autoconfig
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset 965Q found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf0525400 - 0xf05257ff (0x400) MX[B]
	[5] -1	0	0xf0520000 - 0xf0523fff (0x4000) MX[B]
	[6] -1	0	0xf0525000 - 0xf05253ff (0x400) MX[B]
	[7] -1	0	0xf0524000 - 0xf0524fff (0x1000) MX[B]
	[8] -1	0	0xf0500000 - 0xf051ffff (0x20000) MX[B]
	[9] -1	0	0xf0525900 - 0xf052590f (0x10) MX[B]
	[10] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[11] -1	0	0xf0400000 - 0xf04fffff (0x100000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x000010f0 - 0x000010ff (0x10) IX[B]
	[15] -1	0	0x000010e0 - 0x000010ef (0x10) IX[B]
	[16] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[17] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[18] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[20] -1	0	0x00001080 - 0x0000109f (0x20) IX[B]
	[21] -1	0	0x00001060 - 0x0000107f (0x20) IX[B]
	[22] -1	0	0x00001040 - 0x0000105f (0x20) IX[B]
	[23] -1	0	0x00001020 - 0x0000103f (0x20) IX[B]
	[24] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[25] -1	0	0x00001100 - 0x00001107 (0x8) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf0525400 - 0xf05257ff (0x400) MX[B]
	[5] -1	0	0xf0520000 - 0xf0523fff (0x4000) MX[B]
	[6] -1	0	0xf0525000 - 0xf05253ff (0x400) MX[B]
	[7] -1	0	0xf0524000 - 0xf0524fff (0x1000) MX[B]
	[8] -1	0	0xf0500000 - 0xf051ffff (0x20000) MX[B]
	[9] -1	0	0xf0525900 - 0xf052590f (0x10) MX[B]
	[10] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[11] -1	0	0xf0400000 - 0xf04fffff (0x100000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x000010f0 - 0x000010ff (0x10) IX[B]
	[18] -1	0	0x000010e0 - 0x000010ef (0x10) IX[B]
	[19] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[20] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[21] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[23] -1	0	0x00001080 - 0x0000109f (0x20) IX[B]
	[24] -1	0	0x00001060 - 0x0000107f (0x20) IX[B]
	[25] -1	0	0x00001040 - 0x0000105f (0x20) IX[B]
	[26] -1	0	0x00001020 - 0x0000103f (0x20) IX[B]
	[27] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[28] -1	0	0x00001100 - 0x00001107 (0x8) IX[B](B)
	[29] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[30] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965Q
(--) intel(0): Chipset: "965Q"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xF0400000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (380, 300) mm
(**) intel(0): DPI set to (85, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 2.2.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000207
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe0000000 - 0xefffffff (0x10000000) MS[B]
	[1] 0	0	0xf0400000 - 0xf04fffff (0x100000) MS[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xf0525400 - 0xf05257ff (0x400) MX[B]
	[7] -1	0	0xf0520000 - 0xf0523fff (0x4000) MX[B]
	[8] -1	0	0xf0525000 - 0xf05253ff (0x400) MX[B]
	[9] -1	0	0xf0524000 - 0xf0524fff (0x1000) MX[B]
	[10] -1	0	0xf0500000 - 0xf051ffff (0x20000) MX[B]
	[11] -1	0	0xf0525900 - 0xf052590f (0x10) MX[B]
	[12] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[13] -1	0	0xf0400000 - 0xf04fffff (0x100000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[17] 0	0	0x00001100 - 0x00001107 (0x8) IS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x000010f0 - 0x000010ff (0x10) IX[B]
	[21] -1	0	0x000010e0 - 0x000010ef (0x10) IX[B]
	[22] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[23] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[24] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[26] -1	0	0x00001080 - 0x0000109f (0x20) IX[B]
	[27] -1	0	0x00001060 - 0x0000107f (0x20) IX[B]
	[28] -1	0	0x00001040 - 0x0000105f (0x20) IX[B]
	[29] -1	0	0x00001020 - 0x0000103f (0x20) IX[B]
	[30] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[31] -1	0	0x00001100 - 0x00001107 (0x8) IX[B](B)
	[32] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[33] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 1103104 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 4412412 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Success.
(II) intel(0): [drm] Registers = 0xf0400000
(II) intel(0): [drm] ring buffer = 0xe0000000
(II) intel(0): [drm] mapped front buffer at 0xe0100000, handle = 0xe0100000
(II) intel(0): [drm] mapped back buffer at 0xe1a00000, handle = 0xe1a00000
(II) intel(0): [drm] mapped depth buffer at 0xe2040000, handle = 0xe2040000
(II) intel(0): [drm] mapped classic textures at 0xe2680000, handle = 0xe2680000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xe0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) intel(0): EXA greedy migration mode enabled.
(II) EXA(0): Forcing greedy migration option
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
(II) intel(0): 0x00042000-0x00042fff: overlay registers (4 kB)
(II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 337 x 270
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fi"
(**) Generic Keyboard: XkbLayout: "fi"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
SetClientVersion: 0 9
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x04680000 (pgoffset 18048)
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) 3rd Button detected: disabling emulate3Button
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x04680000 (pgoffset 18048)
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x04680000 (pgoffset 18048)
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x04680000 (pgoffset 18048)
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): EDID vendor "HWP", prod id 9822
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9822
SetGrabKeysState - disabled
SetGrabKeysState - enabled
=== lsusb -v ===
Bus 006 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.24-16-generic ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1d.7
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 005 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.24-16-generic ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1a.7
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.24-16-generic uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.24-16-generic uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.24-16-generic uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1a.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 001 Device 004: ID 03f0:1024 Hewlett-Packard
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        16
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x1024
  bcdDevice            5.35
  iManufacturer           1 Hewlett-Packard Company
  iProduct                2 HP USB Smart Card Keyboard
  iSerial                 5 0816fe08
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          111
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          3 HP USB Smart Card Keyboard
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      54
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              16
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        11 Chip/SmartCard
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              4 CCID Interface
      ChipCard Interface Descriptor:
        bLength                54
        bDescriptorType        33
        bcdCCID              1.00
        nMaxSlotIndex           0
        bVoltageSupport         1  5.0V
        dwProtocols             3  T=0 T=1
        dwDefaultClock       4000
        dwMaxiumumClock      8000
        bNumClockSupported      0
        dwDataRate          10753 bps
        dwMaxDataRate      344105 bps
        bNumDataRatesSupp.      0
        dwMaxIFSD             252
        dwSyncProtocols  00000000
        dwMechanical     00000000
        dwFeatures       000100BA
          Auto configuration based on ATR
          Auto voltage selection
          Auto clock change
          Auto baud rate change
          Auto PPS made by CCID
          TPDU level exchange
        dwMaxCCIDMsgLen       263
        bClassGetResponse    echo
        bClassEnvelope       echo
        wlcdLayout           none
        bPINSupport             3  verification modification
        bMaxCCIDBusySlots       1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval             255
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval             255
Device Status:     0x0000
  (Bus Powered)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.24-16-generic uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1a.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0103 power enable connect
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
=== packages *driver* *usb* *grub* *firefox* *thunderbird* 915resolution* ===
No packages found matching 915resolution*.
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-f/Unpacked/Failed-cfg/Half-inst/t-aWait/T-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name                                       Version                       Description
+++-==========================================-=============================-============================================
ii  cupsddk-drivers                            1.2.0-0ubuntu1                CUPS Driver Development Kit - Driver files
ii  cupsys-driver-gutenprint                   5.0.2-2ubuntu1                printer drivers for CUPS
ii  firefox                                    3.0~b5+nobinonly-0ubuntu1     meta package for the popular mozilla web bro
ii  firefox-3.0                                3.0~b5+nobinonly-0ubuntu1     safe and easy web browser from Mozilla
ii  firefox-3.0-gnome-support                  3.0~b5+nobinonly-0ubuntu1     Support for Gnome in Mozilla Firefox
ii  firefox-gnome-support                      3.0~b5+nobinonly-0ubuntu1     meta package pointing to the latest gnome-su
ii  grub                                       0.97-29ubuntu21               GRand Unified Bootloader
ii  libusb-0.1-4                               2:0.1.12-8                    userspace USB programming library
ii  mozilla-firefox-locale-en-gb               2.0.0.7+1-0ubuntu3            Mozilla Firefox English language/region pack
ii  thunderbird-locale-en-gb                   1:2.0.0.0+1-0ubuntu1          Thunderbird English language/region package
ii  thunderbird-locale-fi                      1:2.0.0.0+1-0ubuntu1          Thunderbird Finnish language/region package
ii  usbutils                                   0.73-5ubuntu2                 Linux USB utilities
ii  xserver-xorg-video-sisusb                  1:0.8.1-9                     X.Org X server -- SiS USB display driver


Lyhyesti suomeksi

Ubuntu 8.04 Hardy alias “Harri Haikara” julkaistaan huhtikuussa 2008. Tällä sivulla on latauslinkit, uudet ominaisuudet ja löydetyt virheet.

You can use, study, modify and distribute the text on this page according to GNU General Public License, version 2 or later.



Posted in Old Site | Tagged | Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *